Adafruit RGB Matrix Bonnet
SoberingRealityCheck·EDES301·project_02/hardware/window/Adafruit /Adafruit RGB Matrix Bonnet.kicad_pcb
About the Adafruit RGB Matrix Bonnet PCB
Adafruit RGB Matrix Bonnet is an open source Raspberry Pi PCB design by SoberingRealityCheck, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 30.7 mm, with 21 components from 19 distinct parts.
Its main chip is the RASPBERRYPI_BPLUS_BONNET_THMSMT, from the Raspberry Pi family. Other key parts include the MAX4866T and 74AHCT245. By type, the board carries 8 ICs, 2 transistors, 2 jumpers, 2 diodes, 2 resistors and 1 crystal.
It belongs with the displays & leds designs in this gallery.
From the project
Repository for my Spring 2026 'EDES 301 - Introduction to Practical Electrical Engineering' classwork.
This repo contains the KiCAD Project files for my 'Window to Another World' EDES 310 PCB project.
The Window is a device intended for art programs / simple games - it runs a linux system with a custom LED matrix display and connections to an IMU, a buzzer, and four buttons.
This repo contains the KiCAD project files for the full system on one chip.
The board is a four-layer PCB with a custom design intended to be mounted directly below the LED Matrix and span the full width of the device.

Main components on the Adafruit RGB Matrix Bonnet
Adafruit RGB Matrix Bonnet bill of materials (BOM)
21 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX4866T | SOT23-6 | IC3 |
| 2 | 74AHCT245 AITRIP | TSSOP20 | U3, U5 |
| 1 | — | BONNET_MATRIX_TOP | U$1 |
| 1 | — | PCBFEAT-REV-056 | U$3 |
| 1 | — | BONNET_MATRIX_BOT | U$6 |
| 1 | — | SYMBOL_PLUS | U$10 |
| 1 | — | SYMBOL_MINUS | U$11 |
| 1 | AON3414 | POWERPAK-1212-8 | Q1 |
| 1 | AON7401 | POWERDI3333 | Q2 |
| 1 | 2.1mm DC Adafruit | DCJACK_2MM_PTH | X1 |
| 1 | HEADER-1X25 | 1X25_ROUND_70MIL | CONN1 |
| 1 | — | 1X03_ROUND_76 | JP1 |
| 1 | — | 2X08_SHROUDED | JP15 |
| 1 | PINHEAD | TERMBLOCK508 | MATRIX_PWR0 |
| 1 | RASPBERRYPI_BPLUS_BONNET_THMSMT | PI_BONNET_THMSMT | RPI1 |
| 1 | — | SOLDERJUMPER_2WAY_OPEN_NOPASTE | SJ1 |
| 1 | MBR120 | SOD-123 | D1 |
| 1 | green | CHIPLED_0805_NOOUTLINE | D2 |
| 2 | 1K - | 0805-NO | R4, R13 |
Adafruit RGB Matrix Bonnet design files
The KiCad project lives in the SoberingRealityCheck/EDES301 repository on GitHub; these links point at the commit this page was built from.
Adafruit RGB Matrix Bonnet: common questions
What microcontroller does the Adafruit RGB Matrix Bonnet use?
The Adafruit RGB Matrix Bonnet is built around the RASPBERRYPI_BPLUS_BONNET_THMSMT, from the Raspberry Pi family.
How big is the Adafruit RGB Matrix Bonnet PCB?
The Adafruit RGB Matrix Bonnet measures 65 × 30.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adafruit RGB Matrix Bonnet?
21 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Adafruit RGB Matrix Bonnet design files?
From the SoberingRealityCheck/EDES301 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Adafruit RGB Matrix Bonnet design in my own project?
Yes, under the terms of its MIT license, which SoberingRealityCheck chose for the repository.
Can I test firmware for the Adafruit RGB Matrix Bonnet without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in EDES301
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507