Two tier nametag - back
sokrasins·nametag·nametag_back/nametag_back.kicad_pcb
About the Two tier nametag - back PCB
Two tier nametag - back is an open source PCB design by sokrasins, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 75 mm, with 62 components from 11 distinct parts.
Other key parts include the TPS613221ADBV. By type, the board carries 27 diodes, 27 resistors, 2 capacitors, 1 IC, 1 transistor and 1 battery holder.
It belongs with the power & battery designs in this gallery.
From the project
SMD Nametag for Make Roanoke
A battery-powered, LED-lit "My name is" name tag for MAKE Roanoke, designed in KiCad 9.
- Back board: holds all the electronics, including the battery, power switch, boost converter, brightness pot and 27 LEDs. This board provides illumination to highlight the features on the front board. - Front board: a plain faceplate with no parts. It has the "My name is:" silkscreen and a wrench graphic, and it covers the LED area of the back board. The board lacks soldermask so that the wrench and the area with the individual's name light up when the name tag is on.

Main components on the Two tier nametag - back
Two tier nametag - back bill of materials (BOM)
62 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS613221ADBV | SOT-23-5 | U1 |
| 1 | BSS138 | SOT-23 | Q1 |
| 1 | AAA (1.5V) | BatteryHolder_Keystone_2466_1xAAA | BT1 |
| 1 | 10k | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW2 |
| 22 | YELLOW | LED_1206_3216Metric | D1, D2, D3, D4, D5, D6, D7, D8 +14 |
| 5 | GREEN | LED_1206_3216Metric | D21, D22, D23, D24, D25 |
| 1 | 4.7 uH | L_0805_2012Metric | L1 |
| 1 | 2.2 uF | C_0805_2012Metric | C1 |
| 1 | 22 uF | C_0805_2012Metric | C2 |
| 27 | 1k | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +19 |
Two tier nametag - back design files
The KiCad project lives in the sokrasins/nametag repository on GitHub; these links point at the commit this page was built from.
Two tier nametag - back: common questions
How big is the Two tier nametag - back PCB?
The Two tier nametag - back measures 100 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Two tier nametag - back?
62 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Two tier nametag - back design files?
From the sokrasins/nametag repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Two tier nametag - back design in my own project?
Yes, under the terms of its MIT license, which sokrasins chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k