Usb to uart

solderdemon·usb-to-uart

Usb to uart PCB layout, top view — open source board by solderdemon

About the Usb to uart PCB

Usb to uart is an open source PCB design by solderdemon, published on GitHub. It is a 2-layer board measuring 18 × 33 mm, with 11 components from 8 distinct parts.

Other key parts include the CH340C. By type, the board carries 5 resistors, 3 diodes, 1 IC, 1 connector and 1 capacitor.

It belongs with the usb & debug tools designs in this gallery.

From the project

A compact USB-C to 5V UART adapter based on the WCH CH340C.

A compact USB-C to 5V UART adapter based on the WCH CH340C.

Designed primarily as a direct plug-in serial adapter for retrocomputing systems like the roscom68k and rosco6502, but also works with any 5V microcontroller or serial device using a standard 6-pin header.

- Controller: WCH CH340C (integrated clock oscillator — no external crystal required) - USB Interface: USB Type-C receptacle with 5.1 kΩ CC pull-downs (compatible with both C-to-C and A-to-C cables) - Logic Level: Native 5V TTL (powered directly from USB VBUS; ideal for 5V retro hardware without level shifters) - Flow Control…

Usb to uart, from the project README
From the project README

Main components on the Usb to uart

Usb to uart bill of materials (BOM)

11 components, 8 distinct parts.

QtyPartRefs
1
CH340C
U1
1
USB-C
J1
1
PWR
D1
1
TX
D2
1
RX
D3
1
100nF
C1
2
5.1K
R1, R2
3
1k
R3, R4, R5

Usb to uart design files

The KiCad project lives in the solderdemon/usb-to-uart repository on GitHub; these links point at the commit this page was built from.

Usb to uart: common questions

How big is the Usb to uart PCB?

The Usb to uart measures 18 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Usb to uart?

11 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Usb to uart design files?

From the solderdemon/usb-to-uart repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Usb to uart design in my own project?

The repository has no license, so all rights stay with solderdemon. Use it as a reference, and ask the author before reusing the design.

Similar boards