DAC-6-bit-1-channel-MCP47A1-breakout hardware design
SolderedElectronics·DAC-6-bit-1-channel-MCP47A1-breakout-hardware-design·CAD/V1.1.1/DAC_breakout_MCP47A1.kicad_pcb
About the DAC-6-bit-1-channel-MCP47A1-breakout hardware design
DAC-6-bit-1-channel-MCP47A1-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 15 components from 11 distinct parts.
Other key parts include the MCP47A1. By type, the board carries 4 relays, 3 resistors, 2 jumpers, 2 capacitors, 1 IC and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for DAC-6-bit-1-channel-MCP47A1-breakout designed by Soldered Electronics.
This device uses MCP47A1 which is a single channel, 6-bit digital to analog converter with I2C compatible serial interface. There’s no integrated EEPROM memory which would allow DAC register and configuration bit values to be saved at powered off.
This repository contains all design files for DAC 6-bit 1-channel MCP47A1 breakout, organized as follows:
- CAD folder: Contains KiCAD design files, including: - Schematics - PCB layout - Panel PCB layout - Source 3D files in Fusion360, if any - All files are sorted by version with a detailed change log. - OUTPUTS folder: Includes all…

Main components on the DAC-6-bit-1-channel-MCP47A1-breakout hardware design
DAC-6-bit-1-channel-MCP47A1-breakout hardware design bill of materials (BOM)
15 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP47A1 | MCP47A1-SOT23-6 | U1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP2 |
| 1 | TERMINAL_KF235-5.0-2P | TERMINAL_KF235-5.0-2P | K1 |
| 2 | easyC-SMD | easyC-connector | K2, K4 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K3 |
| 1 | purple | 0402LED | D1 |
| 2 | 100NF 100nF | 0603C | C1, C2 |
| 2 | 10K 10k | 0603R | R1, R2 |
| 1 | 2K2 2k2 | 0402R | R3 |
DAC-6-bit-1-channel-MCP47A1-breakout hardware design design files
The KiCad project lives in the SolderedElectronics/DAC-6-bit-1-channel-MCP47A1-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
DAC-6-bit-1-channel-MCP47A1-breakout hardware design: common questions
How big is the DAC-6-bit-1-channel-MCP47A1-breakout hardware design?
The DAC-6-bit-1-channel-MCP47A1-breakout hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DAC-6-bit-1-channel-MCP47A1-breakout hardware design?
15 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DAC-6-bit-1-channel-MCP47A1-breakout hardware design design files?
From the SolderedElectronics/DAC-6-bit-1-channel-MCP47A1-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DAC-6-bit-1-channel-MCP47A1-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979