I2C-LCD-adapter hardware design
SolderedElectronics·I2C-LCD-adapter-hardware-design·CAD/V1.2.2/EasyC_LCD_Driver.kicad_pcb
About the I2C-LCD-adapter hardware design PCB
I2C-LCD-adapter hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 54 × 22 mm, with 32 components from 20 distinct parts.
Other key parts include the TCA9534PWR, TPS613222A and NMOS-DUAL. By type, the board carries 10 resistors, 5 jumpers, 5 relays, 5 capacitors, 3 ICs and 1 transistor.
It belongs with the displays & leds designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for I2C-LCD-adapter designed by Soldered Electronics.
This adapter makes connection of LCD to Dasduino (or any other Arduino-compatible board) a breeze! It uses I2C communication which needs only two pins. It can be used and work with all of ours LCDs (16×2, 20×4, 16×4). Use our library and get started in few minutes of work!
It’s even easier with qwiic – no soldering is needed!
This repository contains all design files for I2C LCD adapter, organized as follows:

Main components on the I2C-LCD-adapter hardware design
I2C-LCD-adapter hardware design bill of materials (BOM)
32 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA9534PWR | TSSOP-16 | U1 |
| 1 | TPS613222A | tps613222a | U2 |
| 1 | NMOS-DUAL | SOT-363 | U3 |
| 1 | NMOS-SOT-23-3 NMOS | SOT-23-3 | Q1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP2 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP3 |
| 2 | SMD_JUMPER_3_PAD_TRACE SMD_JUMPER | SMD_JUMPER | JP4, JP5 |
| 2 | easyC-SMD | easyC-connector | K1, K2 |
| 2 | HEADER_MALE_8X1 | HEADER_MALE_8X1 | K3, K4 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K5 |
| 1 | DFE201612E-2R2M=P2 | 0806L | L1 |
| 2 | CL10A226MPCNUBE | 0805C | C1, C2 |
| 1 | 1UF 1u | 0603C | C3 |
| 1 | 0.1UF 100n | 0603C | C4 |
| 1 | C1608X7S1A475K080AC | 0805C | C5 |
| 3 | 100K 100k | 0603R | R1, R2, R3 |
| 5 | 10K 10k | 0603R | R4, R6, R8, R9, R10 |
| 1 | 330R 0R | 0603R | R5 |
| 1 | TC33X-2-103E tc33x-2-103e | tc33x-2-103e | R7 |
I2C-LCD-adapter hardware design design files
The KiCad project lives in the SolderedElectronics/I2C-LCD-adapter-hardware-design repository on GitHub; these links point at the commit this page was built from.
I2C-LCD-adapter hardware design: common questions
How big is the I2C-LCD-adapter hardware design PCB?
The I2C-LCD-adapter hardware design measures 54 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I2C-LCD-adapter hardware design?
32 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the I2C-LCD-adapter hardware design design files?
From the SolderedElectronics/I2C-LCD-adapter-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the I2C-LCD-adapter hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k