59 open source boards using the TPS613222A

Real designs built with the TPS613222A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

59 boardsClear filters|Most starred

How designs wire the TPS613222A

Read from the KiCad layouts of 47 open source designs, one per repository: what each pin of the TPS613222A connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 43 of 47 designs.
  • The VOUT pin has a decoupling capacitor on 43 of 46 designs.
SWpin 1Connected to: Signal 98%
  • Inductor on 91%
GNDpin 2Connected to: GND 98%
NCpin 3, 5Connected to: Not connected 92%
VOUTpin 4Connected to: 5V 93%
  • Decoupling capacitor on 93%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Unni smartification c6-10.99-constraints by lk-ek, I2C-LCD-driver board hardware design by SolderedElectronics, PMS7003-sensor adapter hardware design by SolderedElectronics and Benzene--Toluene--Acetone--Formaldehyde sensor-MQ138-breakout with easyC-hardware design by SolderedElectronics.

The TPS613222A in open source designs

The gallery holds 59 open source boards using the TPS613222A from 47 GitHub repositories; a typical one measures about 22 × 54 mm and carries around 26 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Unni smartification c6-10.99-constraints by lk-ek.

Microcontrollers on boards using the TPS613222A

TPS613222A: common questions

Where can I find a TPS613222A reference design?

Each of the 59 boards on this page is a real design using the TPS613222A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS613222A SW pin connected?

The SW pin has a inductor on 43 of 47 designs. Counted from the KiCad layouts of 47 open source designs using the TPS613222A.

What decoupling capacitors do designs use on the TPS613222A VOUT pin?

The VOUT pin has a decoupling capacitor on 43 of 46 designs. Counted from the KiCad layouts of 47 open source designs using the TPS613222A.

What parts are used alongside the TPS613222A?

The ATTINY404-SSNR, NMOS-DUAL, MQ-X, PC357_OPTO and TCA9534PWR appear in the most repositories here.

Which microcontrollers do boards using the TPS613222A use?

Most are built on AVR/Arduino (50) and ESP32 (1).

How big is a typical board using the TPS613222A?

The median is 22 × 54 mm, and 100% are two-layer designs.

What is the most popular open source board using the TPS613222A?

By GitHub stars, Unni smartification c6-10.99-constraints by lk-ek, with 2 stars.

Can I simulate one of these boards using the TPS613222A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part