Logic level converter generic-TXB0104-breakout hardware design
SolderedElectronics·Logic-level-converter-generic-TXB0104-breakout-hardware-design·CAD/V1.0.0/IC_LEVEL_CONVERTER.kicad_pcb
About the Logic level converter generic-TXB0104-breakout hardware design
Logic level converter generic-TXB0104-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 9 components from 6 distinct parts.
Other key parts include the TXB0104PWR. By type, the board carries 3 relays, 2 capacitors, 1 IC and 1 resistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Logic-level-converter-generic-TXB0104-breakout designed by Soldered Electronics.
This small and simple module gives us a translation of logic level between two signals. In layman’s terms, if we take a signal with logical “unit” on 5V convert into a signal which logical “unit” has on 3.3V this module will help us. Something like this is useful in this case if we want to achieve communication between two devices from whom one works on 5V and the other on 3.3V, or any other combination of voltages. Directly connecting we would “burn” a device that works on 3.3V and a module gives us to avoid that.

Main components on the Logic level converter generic-TXB0104-breakout hardware design
Logic level converter generic-TXB0104-breakout hardware design bill of materials (BOM)
9 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TXB0104PWR | TXB0104QPWRQ1 | U1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 2 | HEADER_MALE_6X1 | HEADER_MALE_6X1 | K1, K3 |
| 1 | HEADER_MALE_1X1 | HEADER_MALE_1X1 | K2 |
| 2 | 0.1UF 0.1uF | 0603C | C1, C2 |
| 1 | 10K 10k | 0603R | R1 |
Logic level converter generic-TXB0104-breakout hardware design design files
The KiCad project lives in the SolderedElectronics/Logic-level-converter-generic-TXB0104-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Logic level converter generic-TXB0104-breakout hardware design: common questions
How big is the Logic level converter generic-TXB0104-breakout hardware design?
The Logic level converter generic-TXB0104-breakout hardware design measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Logic level converter generic-TXB0104-breakout hardware design?
9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Logic level converter generic-TXB0104-breakout hardware design design files?
From the SolderedElectronics/Logic-level-converter-generic-TXB0104-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Logic level converter generic-TXB0104-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979