Logic level converter-I2C-TXS0104-breakout hardware design

SolderedElectronics·Logic-level-converter-I2C-TXS0104-breakout-hardware-design·CAD/V1.0.0/IC_LEVEL_CONVERTER.kicad_pcb

Logic level converter-I2C-TXS0104-breakout hardware design layout, top view — open source board by SolderedElectronics

About the Logic level converter-I2C-TXS0104-breakout hardware design

Logic level converter-I2C-TXS0104-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 9 components from 6 distinct parts.

Other key parts include the TXS0104EPWR. By type, the board carries 3 relays, 2 capacitors, 1 IC and 1 resistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Logic-level-converter-I2C-TXS0104-breakout designed by Soldered Electronics.

This small and simple module gives us a translation of logic level between two signals. In layman’s terms, if we take a signal with logical “unit” on 5V convert into a signal which logical “unit” has on 3.3V this module will help us. Something like this is useful in this case if we want to achieve communication between two devices from whom one works on 5V and the other on 3.3V, or any other combination of voltages. Directly connecting we would “burn” a device that works on 3.3V and a module gives us to avoid that.

Logic level converter-I2C-TXS0104-breakout hardware design, from the project README
From the project README

Main components on the Logic level converter-I2C-TXS0104-breakout hardware design

Logic level converter-I2C-TXS0104-breakout hardware design bill of materials (BOM)

9 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TXS0104EPWR
U1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
2
HEADER_MALE_6X1
K1, K3
1
HEADER_MALE_1X1
K2
2
0.1UF
0.1uF
C1, C2
1
10K
10k
R1

Logic level converter-I2C-TXS0104-breakout hardware design design files

The KiCad project lives in the SolderedElectronics/Logic-level-converter-I2C-TXS0104-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.

Logic level converter-I2C-TXS0104-breakout hardware design: common questions

How big is the Logic level converter-I2C-TXS0104-breakout hardware design?

The Logic level converter-I2C-TXS0104-breakout hardware design measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Logic level converter-I2C-TXS0104-breakout hardware design?

9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Logic level converter-I2C-TXS0104-breakout hardware design design files?

From the SolderedElectronics/Logic-level-converter-I2C-TXS0104-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Logic level converter-I2C-TXS0104-breakout hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Similar boards