18 open source boards using the TXS0104EPWR

Real designs built with the TXS0104EPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the TXS0104EPWR

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the TXS0104EPWR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCB pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF).
  • The VCCA pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF (then 1 µF).
  • The OE pin has a resistor to GND on 7 of 13 designs, most often 100 kΩ (then 10 kΩ).
  • The OE pin has a pull-up to 3.3V on 6 of 13 designs, most often 10 kΩ.
VCCApin 1Connected to: 3.3V 85% · a signal 15%
  • Decoupling capacitor on 62% · 100 nF (5), 1 µF (1)
NCpin 6, 9Connected to: Not connected 100%
GNDpin 7Connected to: GND 85% · a signal 15%
OEpin 8Connected to: The microcontroller 23% · 3.3V 15%
  • Resistor to GND on 54% · 100 kΩ (3), 10 kΩ (2)
  • Pull-up to 3.3V on 46% · 10 kΩ (4)
  • Series resistor on 31% · 100 kΩ (2)
VCCBpin 14Connected to: 3.3V 62% · a signal 38%
  • Decoupling capacitor on 85% · 100 nF (7), 1 µF (3), 10 µF (1)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics, Open race v2 by teehee567, TNbadge by eutectic6337 and PayloadPrototypeBoard2021 by Case-Rocket-Team.

The TXS0104EPWR in open source designs

The gallery holds 18 open source boards using the TXS0104EPWR from 13 GitHub repositories; a typical one measures about 122.2 × 89 mm and carries around 242 components.

67% are two-layer designs, the rest use four layers or more, and 72% carry an open source license.

The most starred is Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics.

Microcontrollers on boards using the TXS0104EPWR

TXS0104EPWR: common questions

Where can I find a TXS0104EPWR reference design?

Each of the 18 boards on this page is a real design using the TXS0104EPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXS0104EPWR VCCB pin?

The VCCB pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the TXS0104EPWR.

What decoupling capacitors do designs use on the TXS0104EPWR VCCA pin?

The VCCA pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the TXS0104EPWR.

What resistor goes on the TXS0104EPWR OE pin?

The OE pin has a resistor to GND on 7 of 13 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 13 open source designs using the TXS0104EPWR.

What parts are used alongside the TXS0104EPWR?

The AP5726WG-7, CH340C, ESP32-WROVER, MC14093BDTR2G and MCP47A1 appear in the most repositories here.

Which microcontrollers do boards using the TXS0104EPWR use?

Most are built on ESP32 (14), AVR/Arduino (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the TXS0104EPWR?

The median is 122.2 × 89 mm, and 67% are two-layer designs.

What is the most popular open source board using the TXS0104EPWR?

By GitHub stars, Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics, with 5 stars.

Can I simulate one of these boards using the TXS0104EPWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part