Raspberry-Pi breadboard breakout hardware design
SolderedElectronics·Raspberry-Pi-breadboard-breakout-hardware-design·CAD/V1.1.1/Raspberry_PI_breakout.kicad_pcb
About the Raspberry-Pi breadboard breakout hardware design
Raspberry-Pi breadboard breakout hardware design is an open source Raspberry Pi PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 60 × 74 mm, with 8 components from 4 distinct parts.
Its main chip is the RASPBERRY_PI4_HEADER, from the Raspberry Pi family.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Raspberry-Pi-breadboard-breakout designed by Soldered Electronics.
With the Raspberry Pi breadboard breakout board, you can easily connect your Raspberry Pi with a regular breadboard. It fits on standard half-size and full-size breadboards. It even adds a couple of ground and power supply pins. Best of all, the pins are already soldered. You just have to plug the cable in. This breakout will get you prototyping on the Raspberry Pi in no time!

Raspberry-Pi breadboard breakout hardware design bill of materials (BOM)
8 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 4 | HEADER_MALE_10X1 | HEADER_MALE_10X1 | K1, K2, K5, K6 |
| 1 | easyC-SMD | easyC-connector | K3 |
| 1 | RASPBERRY_PI4_HEADER | RASPBERRY_PI4_HEADER | K4 |
Raspberry-Pi breadboard breakout hardware design design files
The KiCad project lives in the SolderedElectronics/Raspberry-Pi-breadboard-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Raspberry-Pi breadboard breakout hardware design: common questions
What microcontroller does the Raspberry-Pi breadboard breakout hardware design use?
The Raspberry-Pi breadboard breakout hardware design is built around the RASPBERRY_PI4_HEADER, from the Raspberry Pi family.
How big is the Raspberry-Pi breadboard breakout hardware design?
The Raspberry-Pi breadboard breakout hardware design measures 60 × 74 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Raspberry-Pi breadboard breakout hardware design?
8 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Raspberry-Pi breadboard breakout hardware design design files?
From the SolderedElectronics/Raspberry-Pi-breadboard-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Raspberry-Pi breadboard breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Raspberry-Pi breadboard breakout hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507