Rotary encoder with easyC

SolderedElectronics·Rotary-encoder-board-qwiic-hardware-design·CAD/V1.1.0/Rotary encoder with easyC.kicad_pcb

Rotary encoder with easyC PCB layout, top view — open source AVR/Arduino board by SolderedElectronics

About the Rotary encoder with easyC PCB

Rotary encoder with easyC is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 38 mm, with 22 components from 10 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the ROTARY_ENCODER. By type, the board carries 8 resistors, 4 relays, 4 capacitors and 2 ICs.

From the project

Hardware design, BOM, gerbers and 3D files for Rotary-encoder-board-qwiic designed by Soldered Electronics.

Unleash the potential of digital control with our Rotary Encoder breakout board. Compact and powerful, this module makes working with rotary encoders easy. Rotary encoders are versatile input devices that convert angular position or button movement into digital signals. With the ability to detect direction and distance of rotation, they are perfect for controlling a variety of equipment such as volume knobs on audio devices, motors in robotics, or navigation controls in user interfaces.

Rotary encoder with easyC, from the project README
From the project README

Main components on the Rotary encoder with easyC

Rotary encoder with easyC bill of materials (BOM)

22 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ROTARY_ENCODER
U1
1
ATTINY404-SSNR
U2
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
2
easyC-SMD
K1, K3
1
HEADER-UPDI
K2
1
DSHP03TS-S
K4
4
100N
100n
C1, C2, C3, C4
2
470
R1, R2
2
1k
R3, R4
4
10K
10k
R5, R6, R7, R8

Rotary encoder with easyC design files

The KiCad project lives in the SolderedElectronics/Rotary-encoder-board-qwiic-hardware-design repository on GitHub; these links point at the commit this page was built from.

Rotary encoder with easyC: common questions

What microcontroller does the Rotary encoder with easyC use?

The Rotary encoder with easyC is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Rotary encoder with easyC PCB?

The Rotary encoder with easyC measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rotary encoder with easyC?

22 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rotary encoder with easyC design files?

From the SolderedElectronics/Rotary-encoder-board-qwiic-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rotary encoder with easyC design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Rotary encoder with easyC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Rotary-encoder-board-qwiic-hardware-design

Similar boards