Rottary encoder with easyC

SolderedElectronics·Rotary-encoder-board-with-easyC-hardware-design·CAD/V1.0.0/Rottary encoder with easyC.kicad_pcb

Rottary encoder with easyC PCB layout, top view — open source AVR/Arduino board by SolderedElectronics

About the Rottary encoder with easyC PCB

Rottary encoder with easyC is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 38 mm, with 22 components from 10 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the ROTARY_ENCODER. By type, the board carries 8 resistors, 4 relays, 4 capacitors and 2 ICs.

From the project

Hardware design, BOM, gerbers and 3D files for Rotary-encoder-board-with-easyC designed by Soldered Electronics.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Rottary encoder with easyC

Rottary encoder with easyC bill of materials (BOM)

22 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ROTARY_ENCODER
U1
1
ATTINY404-SSNR
U2
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
2
easyC-SMD
K1, K3
1
HEADER-UPDI
K2
1
DSHP03TS-S
K4
4
100N
100n
C1, C2, C3, C4
2
470
10k
R1, R2
2
10k
R3, R4
4
10K
10k
R5, R6, R7, R8

Rottary encoder with easyC design files

The KiCad project lives in the SolderedElectronics/Rotary-encoder-board-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

Rottary encoder with easyC: common questions

What microcontroller does the Rottary encoder with easyC use?

The Rottary encoder with easyC is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Rottary encoder with easyC PCB?

The Rottary encoder with easyC measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rottary encoder with easyC?

22 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rottary encoder with easyC design files?

From the SolderedElectronics/Rotary-encoder-board-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rottary encoder with easyC design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Rottary encoder with easyC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Rotary-encoder-board-with-easyC-hardware-design

Similar boards