LM393 breakout easyC

SolderedElectronics·Simple-fire-sensor-board-with-easyC-hardware-design·CAD/V1.0.0/LM393_breakout_easyC.kicad_pcb

LM393 breakout easyC layout, top view — open source AVR/Arduino board by SolderedElectronics

About the LM393 breakout easyC

LM393 breakout easyC is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 22 mm, with 20 components from 16 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. By type, the board carries 6 relays, 6 resistors, 3 capacitors, 2 ICs and 1 diode.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Simple-fire-sensor-board-with-easyC designed by Soldered Electronics.

On this module there is a component, a phototransistor, which is capable of detecting infrared radiation. Since fire emits a large amount of infrared radiation, this sensor will detect it, but that is not its only application. Wherever there are IR (infra-red) waves, this sensor will detect them, including solar radiation.

The simple sensor comes with easyC connectors onboard, which enables quick and easy connection with the microcontroller.

LM393 breakout easyC, from the project README
From the project README

Main components on the LM393 breakout easyC

LM393 breakout easyC bill of materials (BOM)

20 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY404-SSNR
LM393
U1
1
ATTINY404-SSNR
U2
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
JST-SH_2PIN_1MM_C145954
HEADER_MALE_2X1
K1
1
HEADER_MALE_2X1
JST-SH_2pin_1mm_C145954
K2
2
easyC-SMD
K3, K5
1
HEADER-UPDI
K4
1
DSHP03TS-S
K6
1
purple
D1
2
0.1UF
0.1uF
C1, C2
1
0.1uF
C3
1
10K
tc33x-2-103e
R1
1
2K2
10k
R2
1
10K
10k
R3
1
10K
1k
R4
2
10k
R5, R6

LM393 breakout easyC design files

The KiCad project lives in the SolderedElectronics/Simple-fire-sensor-board-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

LM393 breakout easyC: common questions

What microcontroller does the LM393 breakout easyC use?

The LM393 breakout easyC is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the LM393 breakout easyC?

The LM393 breakout easyC measures 38 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LM393 breakout easyC?

20 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LM393 breakout easyC design files?

From the SolderedElectronics/Simple-fire-sensor-board-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LM393 breakout easyC design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the LM393 breakout easyC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Simple-fire-sensor-board-with-easyC-hardware-design

Similar boards