EasyC ultrasonic adapter
SolderedElectronics·Ultrasonic-sensor-with-easyC-hardware-design·CAD/V1.0.0/easyC_ultrasonic_adapter.kicad_pcb
About the EasyC ultrasonic adapter PCB
EasyC ultrasonic adapter is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 16 components from 12 distinct parts.
Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the TPS613222A. By type, the board carries 5 relays, 4 capacitors, 2 ICs, 2 resistors and 1 inductor.
It belongs with the sensors designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Ultrasonic-sensor-with-easyC designed by Soldered Electronics.
The HC-SR04 ultrasonic sensor is an affordable and super-popular sensor that measures the distance between itself and an object located in front of the sensor. Very simple to use, it returns the distance in centimeters or inches.
In this variation, it comes on a board with an Attiny microcontroller that sends readings from the sensor as a digital signal via the easyC connector to the microcontroller, which makes its connections a piece of cake.

Main components on the EasyC ultrasonic adapter
EasyC ultrasonic adapter bill of materials (BOM)
16 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY404-SSNR | SOIC-14 | U1 |
| 1 | TPS613222A | tps613222a | U2 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K1 |
| 2 | easyC-SMD | easyC-connector | K2, K4 |
| 1 | HEADER-UPDI | HEADER-UPDI | K3 |
| 1 | DSHP03TS-S | DSHP03TS-S | K5 |
| 1 | DFE201612E-2R2M=P2 | 0806L | L1 |
| 1 | 100N 0.1uF | 0603C | C1 |
| 2 | CL10A226MPCNUBE | 0603C | C2, C3 |
| 1 | C1608X7S1A475K080AC | 0603C | C4 |
| 2 | 10K 10k | 0603R | R1, R2 |
EasyC ultrasonic adapter design files
The KiCad project lives in the SolderedElectronics/Ultrasonic-sensor-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.
EasyC ultrasonic adapter: common questions
What microcontroller does the EasyC ultrasonic adapter use?
The EasyC ultrasonic adapter is built around the ATTINY404-SSNR, from the AVR/Arduino family.
How big is the EasyC ultrasonic adapter PCB?
The EasyC ultrasonic adapter measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EasyC ultrasonic adapter?
16 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EasyC ultrasonic adapter design files?
From the SolderedElectronics/Ultrasonic-sensor-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EasyC ultrasonic adapter design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the EasyC ultrasonic adapter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Ultrasonic-sensor-with-easyC-hardware-design
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k