HardLabs

USB-C female connector breakout panel

SolderedElectronics·USB-C-female-connector-breakout-hardware-design·CAD/V1.2.0/PANEL/USB-C female connector breakout_panel.kicad_pcb

USB-C female connector breakout panel layout, top view — open source board by SolderedElectronics

About the USB-C female connector breakout panel

USB-C female connector breakout panel is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 0 × 0.1 mm, with 4 components from 3 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for USB-C-female-connector-breakout designed by Soldered Electronics.

The USB Type-C is ubiquitous. We always wanted to add it to our electronics projects, and we’re sure you did too. Adding a USB Type-C connector to your projects is easier than ever thanks to this USB Type-C breakout board. It will allow you to send data to your device, as well as add power to the circuit.

The USB Type-C connector’s GND, CC2, SBU2, D-, D+, SBU1, CC1, and VUSB pins are broken out to the plated through-holes.

USB-C female connector breakout panel, from the project README
From the project README

USB-C female connector breakout panel bill of materials (BOM)

4 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
HOLE_3.2mm
H1, H2
1
HEADER_MALE_8X1
K1
1
U262-161N-4BVC11
K2

USB-C female connector breakout panel design files

The KiCad project lives in the SolderedElectronics/USB-C-female-connector-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.

USB-C female connector breakout panel: common questions

How big is the USB-C female connector breakout panel?

The USB-C female connector breakout panel measures 0 × 0.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USB-C female connector breakout panel?

4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the USB-C female connector breakout panel design files?

From the SolderedElectronics/USB-C-female-connector-breakout-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the USB-C female connector breakout panel design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

More boards in USB-C-female-connector-breakout-hardware-design

Similar boards