5 open source boards using the SN74AHCT1G125DCKR
Real designs built with the SN74AHCT1G125DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Osh vacuum
hkienle
101 × 56 mm55 parts2LNo license6ESP32
Open race v2
teehee567
90.5 × 49.5 mm329 parts8LNo license4STM32
Atlas drive
AtlasAutoware
140 × 90 mm377 parts6LNo license0RGB Spotlight - driver board
somebox
50 × 50 mm35 parts2LNo license0ESP32
FMN potentiostat
Kiya86
30 × 60 mm50 parts4LNo license0
How designs wire the SN74AHCT1G125DCKR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74AHCT1G125DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 22 µF).
- The #OE pin is tied to GND on 5 of 5 designs.
- The A pin has a resistor to GND on 2 of 5 designs, most often 10 kΩ.
- The Y pin has a series resistor on 2 of 5 designs, most often 33 Ω (then 220 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| #OEpin 1 | Connected to: GND 100% | — |
| Apin 2 | Connected to: The microcontroller 60% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| Ypin 4 | Connected to: A connector 40% |
|
| VCCpin 5 | Connected to: 5V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Osh vacuum by hkienle, Open race v2 by teehee567, Atlas drive by AtlasAutoware and FMN potentiostat by Kiya86.
The SN74AHCT1G125DCKR in open source designs
The gallery holds 5 open source boards using the SN74AHCT1G125DCKR from 5 GitHub repositories; a typical one measures about 90.5 × 56 mm and carries around 55 components.
60% use four copper layers or more, and 0% carry an open source license.
The most starred is Osh vacuum by hkienle.
Parts used alongside the SN74AHCT1G125DCKR
What boards using the SN74AHCT1G125DCKR are built for
SN74AHCT1G125DCKR: common questions
Where can I find a SN74AHCT1G125DCKR reference design?
Each of the 5 boards on this page is a real design using the SN74AHCT1G125DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74AHCT1G125DCKR VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the SN74AHCT1G125DCKR.
How is the SN74AHCT1G125DCKR #OE pin connected?
The #OE pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74AHCT1G125DCKR.
What resistor goes on the SN74AHCT1G125DCKR A pin?
The A pin has a resistor to GND on 2 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74AHCT1G125DCKR.
Which microcontrollers do boards using the SN74AHCT1G125DCKR use?
Most are built on ESP32 (3) and STM32 (1).
How big is a typical board using the SN74AHCT1G125DCKR?
The median is 90.5 × 56 mm, and 40% are two-layer designs.
What is the most popular open source board using the SN74AHCT1G125DCKR?
By GitHub stars, Osh vacuum by hkienle, with 6 stars.
Can I simulate one of these boards using the SN74AHCT1G125DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.