9 open source boards using the 78L05G-AB3-R
Real designs built with the 78L05G-AB3-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zoxnoxious Z5524 (SSI2130/AS3394)
brer-rabbit
80 × 80 mm222 parts4LGPL-3.068STM32
Anthracite PCB (Bottom)
trope-oshw
60 × 73.5 mm208 parts4LCERN-OHL-S-2.06ESP32
ESP32-Small-SRWLED
wszeto9
19.6 × 20.3 mm35 parts4LNo license2Raspberry Pi
ComposerMIDICV
CopycatMusic
20 × 110 mm86 parts2LAGPL-3.01ESP32
Seed pedal
TMANTsmith
54 × 106 mm67 parts4LNo license1TIGP class board 2026 - main board
TIGP-Experimental-Methods
180 × 100 mm318 parts4LNo license0AVR/Arduino
LEC032002-Module va et vient pour navette en analogique ou funiculaire
LECTIX
49 × 48 mm42 parts2LCERN-OHL-S-2.00RGB Spotlight - driver board
somebox
50 × 50 mm35 parts2LNo license0ESP32
ESP32-Small-SRWLED panelization
wszeto9
41.7 × 43.1 mm35 parts4LNo license2
How designs wire the 78L05G-AB3-R
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 78L05G-AB3-R connects to, and the resistors, capacitors and other passives placed on it.
- The OUT_1 pin is tied to 5V on 7 of 8 designs.
- The IN_3 pin is tied to 12V on 7 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUT_1pin 1 | Connected to: 5V 88% | — |
| GND_2pin 2 | Connected to: GND 88% | — |
| IN_3pin 3 | Connected to: 12V 88% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zoxnoxious Z5524 (SSI2130/AS3394) by brer-rabbit, Anthracite PCB (Bottom) by trope-oshw, ESP32-Small-SRWLED by wszeto9 and ComposerMIDICV by CopycatMusic.
The 78L05G-AB3-R in open source designs
The gallery holds 9 open source boards using the 78L05G-AB3-R from 8 GitHub repositories; a typical one measures about 50 × 73.5 mm and carries around 67 components.
67% use four copper layers or more, and 44% carry an open source license.
The most starred is Zoxnoxious Z5524 (SSI2130/AS3394) by brer-rabbit.
Microcontrollers on boards using the 78L05G-AB3-R
What boards using the 78L05G-AB3-R are built for
78L05G-AB3-R: common questions
Where can I find a 78L05G-AB3-R reference design?
Each of the 9 boards on this page is a real design using the 78L05G-AB3-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 78L05G-AB3-R OUT_1 pin connected?
The OUT_1 pin is tied to 5V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 78L05G-AB3-R.
How is the 78L05G-AB3-R IN_3 pin connected?
The IN_3 pin is tied to 12V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 78L05G-AB3-R.
Which microcontrollers do boards using the 78L05G-AB3-R use?
Most are built on ESP32 (3), AVR/Arduino (1), Raspberry Pi (1) and STM32 (1).
How big is a typical board using the 78L05G-AB3-R?
The median is 50 × 73.5 mm, and 33% are two-layer designs.
What is the most popular open source board using the 78L05G-AB3-R?
By GitHub stars, Zoxnoxious Z5524 (SSI2130/AS3394) by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the 78L05G-AB3-R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.