Transceiver
someonelse20·farsight-rc·hardware/transceiver/transceiver.kicad_pcb
About the Transceiver PCB
Transceiver is an open source STM32 PCB design by someonelse20, published on GitHub. It is a 4-layer board measuring 30 × 30 mm, with 46 components from 31 distinct parts.
Its main chip is the STM32U585CIUX, from the STM32 family. Other key parts include the SX1262IMLTRT, AP2112K-3.3 and PE4259. By type, the board carries 25 capacitors, 4 ICs, 4 connectors, 4 resistors, 3 crystals and 3 inductors.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
Custom remote controler with esp32 to stream telemetry.
Custom long range remote controller with ESP32 to stream telemetry and an STM32 based lora module with the SX1262. The controller has a build in 18650 battery with an integrated charger. The transceiver is its own standalone board and can be used independenly of the controller. I made this project as a part of my larger goal to make a custom drone. I originally was going to make it out of stock modules but decided to design custom pcbs.

Main components on the Transceiver
Transceiver bill of materials (BOM)
46 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SX1262IMLTRT | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | PE4259 | SOT-363_SC-70-6 | U3 |
| 1 | STM32U585CIUX STM32U585CIUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U4 |
| 1 | 32MHZ 32MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Q13FC13500004 | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | X322516MLB4SI | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | CONN_01X04 Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | CONN_01X02 Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J3 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 0900FM15K0039 | Balun_Johanson_0900FM15K0039 | FL1 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | 47NH 47nH | L_0402_1005Metric | L1 |
| 1 | 15UH 15uH | L_0603_1608Metric | L2 |
| 1 | 9.1NH 9.1nH | L_0402_1005Metric | L3 |
| 1 | 47NF 47nF | C_0402_1005Metric | C1 |
| 1 | 47PF 47pF | C_0402_1005Metric | C2 |
| 4 | 1UF 1uF | C_0603_1608Metric | C3, C6, C18, C19 |
| 8 | 0.1UF 0.1uF | C_0402_1005Metric | C4, C5, C12, C14, C15, C16, C17, C21 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470NF 470nF | C_0402_1005Metric | C7 |
| 1 | 1NF 1nF | C_0402_1005Metric | C8 |
| 1 | 39PF 39pF | C_0402_1005Metric | C9 |
| 2 | 3.3PF 3.3pF | C_0402_1005Metric | C10, C11 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C13 |
| 1 | 10UF 10uF | C_0603_1608Metric | C20 |
| 2 | 8.2PF 8.2pF | C_0402_1005Metric | C22, C25 |
| 2 | 15UF 15uF | C_0402_1005Metric | C23, C24 |
| 1 | 100 | R_0402_1005Metric | R1 |
| 2 | 2K | R_0402_1005Metric | R2, R3 |
| 1 | 10K | R_0402_1005Metric | R4 |
Transceiver design files
The KiCad project lives in the someonelse20/farsight-rc repository on GitHub; these links point at the commit this page was built from.
Transceiver: common questions
What microcontroller does the Transceiver use?
The Transceiver is built around the STM32U585CIUX, from the STM32 family.
How big is the Transceiver PCB?
The Transceiver measures 30 × 30 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Transceiver?
46 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Transceiver design files?
From the someonelse20/farsight-rc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Transceiver design in my own project?
The repository has no license, so all rights stay with someonelse20. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Transceiver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in farsight-rc
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k