34 open source boards using the PE4259
Real designs built with the PE4259, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Hermes-Lite 2.0
softerhardware
100 × 100 mm488 parts4LNo license372STM32
Panel
embeddedalpha
99.7 × 108 mm94 partsMIT75NXP
Horizon
Horizon-Avionics
68.8 × 90.3 mm168 parts4LNo license17ESP32
Black-Flipper
Broccoliux
142.1 × 143 mm206 parts4LNo license7STM32
Generator 5351 rect sine
MR-DOS
102.4 × 102.4 mm280 parts2LGPL-3.06Lora modul
balcer
27.3 × 24.5 mm36 parts4LNo license6LowLoRa
SorenGilkeyJohnson
23.4 × 25.4 mm64 parts4LCERN-OHL-S-2.03RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1ESP32
Null
jadenvv
40.5 × 80.2 mm121 parts4LNo license1STM32
GRAVITAS
GoTouchGra55
60 × 84.3 mm111 parts4LMIT1ESP32
Messenger
nickzentmayer
68 × 73.5 mm89 parts4LNo license1STM32
Stm32f103 FlyBoard
fademike
35 × 25 mm88 parts2LNo license1RP2040/RP2350
RouteSync
Sai-Santosh09
42 × 42 mm55 parts4LNo license1ISM02
mlab-modules
50.3 × 30 mm51 parts2LGPL-3.01RP2040/RP2350
LORA
v1m08
35.2 × 37 mm50 parts4LNo license1RP2040/RP2350
Akash-Chowa-DX
Hasnat4763
98.5 × 70.9 mm44 parts4LMIT1AVR/Arduino
DATALOGGER02
mlab-modules
101.1 × 60.5 mm153 parts2LGPL-3.00ESP32
Accoustic Sensing Node
irocobble
93.9 × 49.8 mm105 parts2LNo license0STM32
BigBoi
NedreAkerselvSkapervOgAkadmikerforening
70 × 70 mm96 parts4LNo license0ESP32
SquirrelCore
SupperSimonMiku
60 × 35 mm92 parts4LMIT0STM32
Rf rocket module
UC-Aerospace
65 × 50 mm82 parts4LNo license0STM32
Elora vision
aminjahanpour
40 × 39 mm70 parts4LNo license0RP2040/RP2350
Nano LoRa
AayanShaikh007
21 × 51 mm65 parts4LCC-BY-NC-4.00Microchip SAM
Topaz
dfedor2008
30.5 × 72.9 mm56 parts4LNo license0ESP32
Rc wow
dipa-cotton
62.4 × 81.6 mm51 parts4LNo license0RP2040/RP2350
Lora-Puck
MohamadAminGhanoum
40.2 × 44.9 mm50 parts4LNo license0RP2040/RP2350
Lora guide forge hackclub
lizardman343242
37 × 41.5 mm49 parts4LNo license0RFSWITCH01
mlab-modules
40.1 × 40.1 mm41 parts2LGPL-3.00Microchip SAM
Gs
Horizon-Avionics
76 × 35 mm37 parts2LNo license17Mic+MPU
irocobble
100 × 100 mm78 parts2LNo license0STM32
Transceiver
someonelse20
30 × 30 mm46 parts4LNo license0STM32
ArmTrax
embeddedalpha
93.6 × 32 mm92 partsMIT75STM32
ArmTrax OG
embeddedalpha
93.6 × 32 mm92 partsMIT75STM32
LoRa STM32 Board
collins-emasi
51.6 × 56 mm81 parts4LNo license1
How designs wire the PE4259
Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the PE4259 connects to, and the resistors, capacitors and other passives placed on it.
- The RFIN pin has a series capacitor on 25 of 30 designs, most often 39 pF (then 100 pF).
- The CTRL pin has a capacitor to GND on 23 of 30 designs, most often 1 nF (then 100 nF).
- The CTRL pin has a series resistor on 21 of 30 designs, most often 100 Ω (then 1 kΩ).
- The VDD pin has a decoupling capacitor on 14 of 29 designs, most often 1 nF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RF1pin 1 | Connected to: Signal 93% |
|
| GNDpin 2 | Connected to: GND 90% | — |
| RF2pin 3 | Connected to: Signal 90% |
|
| CTRLpin 4 | Connected to: Signal 93% |
|
| RFINpin 5 | Connected to: Signal 97% |
|
| VDDpin 6 | Connected to: 3.3V 55% · a signal 45% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hermes-Lite 2.0 by softerhardware, ArmTrax by embeddedalpha, Gs by Horizon-Avionics and Black-Flipper by Broccoliux.
The PE4259 in open source designs
The gallery holds 34 open source boards using the PE4259 from 30 GitHub repositories; a typical one measures about 60 × 50.5 mm and carries around 82 components.
74% use four copper layers or more, and 32% carry an open source license.
The most starred is Hermes-Lite 2.0 by softerhardware.
Parts used alongside the PE4259
Microcontrollers on boards using the PE4259
What boards using the PE4259 are built for
PE4259: common questions
Where can I find a PE4259 reference design?
Each of the 34 boards on this page is a real design using the PE4259. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the PE4259 RFIN pin connected?
The RFIN pin has a series capacitor on 25 of 30 designs, most often 39 pF (then 100 pF). Counted from the KiCad layouts of 30 open source designs using the PE4259.
How is the PE4259 CTRL pin connected?
The CTRL pin has a capacitor to GND on 23 of 30 designs, most often 1 nF (then 100 nF). Counted from the KiCad layouts of 30 open source designs using the PE4259.
What decoupling capacitors do designs use on the PE4259 VDD pin?
The VDD pin has a decoupling capacitor on 14 of 29 designs, most often 1 nF (then 100 nF). Counted from the KiCad layouts of 30 open source designs using the PE4259.
What parts are used alongside the PE4259?
The SX1262IMLTRT, AP2112K-3.3, W25Q128JVS, RP2040 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the PE4259 use?
Most are built on STM32 (11), RP2040/RP2350 (7), ESP32 (6) and Microchip SAM (2).
How big is a typical board using the PE4259?
The median is 60 × 50.5 mm, and 26% are two-layer designs.
What is the most popular open source board using the PE4259?
By GitHub stars, Hermes-Lite 2.0 by softerhardware, with 372 stars.
Can I simulate one of these boards using the PE4259 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.