Controller
someonelse20·farsight-rc·hardware/controller/controller.kicad_pcb
About the Controller PCB
Controller is an open source ESP32 PCB design by someonelse20, published on GitHub. It is a 2-layer board measuring 125 × 95 mm, with 59 components from 33 distinct parts.
Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the BQ25895RTW and AMS1117-3.3. By type, the board carries 24 resistors, 17 capacitors, 5 connectors, 5 switches, 3 ICs and 1 transistor.
It belongs with the rf & radio, power & battery and iot & wireless designs in this gallery.
From the project
Custom remote controler with esp32 to stream telemetry.
Custom long range remote controller with ESP32 to stream telemetry and an STM32 based lora module with the SX1262. The controller has a build in 18650 battery with an integrated charger. The transceiver is its own standalone board and can be used independenly of the controller. I made this project as a part of my larger goal to make a custom drone. I originally was going to make it out of stock modules but decided to design custom pcbs.

Main components on the Controller
Controller bill of materials (BOM)
59 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ25895RTW | Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | ESP32-S3-MINI-1 | ESP32-S2-MINI-1 | U6 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | MICRO_SD_CARD_DET_HIROSE_DM3AT Micro_SD_Card_Det_Hirose_DM3AT | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
| 1 | Display | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | Tranceiver Data | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Tranceiver Boot/Rst | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Battery | BatteryHolder_MPD_BH-18650-PC | BT1 |
| 1 | Reset | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | Boot | SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | SW_SPDT | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW3 |
| 1 | BTN_1 | SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | SW4 |
| 1 | BTN_2 | SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | SW5 |
| 1 | Thermistor | R_0402_1005Metric | TH1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 2.2UH 2.2uH | L_6.3x6.3_H3 | L4 |
| 7 | 0.1UF 0.1uF | C_0402_1005Metric | C1, C2, C5, C13, C14, C23, C26 |
| 2 | 1UF 1uF | C_0402_1005Metric | C4, C15 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 22UF 22uF | C_0603_1608Metric | C6, C17, C18 |
| 1 | 47NF 47nF | C_0402_1005Metric | C16 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C19 |
| 3 | 10UF 10uF | C_0603_1608Metric | C20, C21, C22 |
| 2 | THB001P | THB001P_CNK | R1, R2 |
| 11 | 10K | R_0402_1005Metric | R3, R5, R6, R7, R8, R9, R10, R16 +3 |
| 2 | 100 | R_0402_1005Metric | R4, R27 |
| 3 | 5.1K | R_0402_1005Metric | R11, R12, R15 |
| 1 | 5.2K | R_0402_1005Metric | R13 |
| 1 | 30.1K | R_0402_1005Metric | R14 |
| 1 | 200 | R_0402_1005Metric | R19 |
| 1 | 5.5K | R_0402_1005Metric | R22 |
| 2 | 27 | R_0402_1005Metric | R25, R26 |
Controller design files
The KiCad project lives in the someonelse20/farsight-rc repository on GitHub; these links point at the commit this page was built from.
Controller: common questions
What microcontroller does the Controller use?
The Controller is built around the ESP32-S3-MINI-1, from the ESP32 family.
How big is the Controller PCB?
The Controller measures 125 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Controller?
59 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Controller design files?
From the someonelse20/farsight-rc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Controller design in my own project?
The repository has no license, so all rights stay with someonelse20. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in farsight-rc
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k