49 open source boards using the SX1262IMLTRT

Real designs built with the SX1262IMLTRT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

49 boardsClear filters|Most starred

How designs wire the SX1262IMLTRT

Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the SX1262IMLTRT connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_IN pin has a decoupling capacitor on 31 of 36 designs, most often 100 nF (then 1 µF).
  • The VREG pin has a capacitor to GND on 31 of 36 designs, most often 470 nF (then 100 nF).
  • The DCC_SW pin has a inductor on 31 of 35 designs, most often 15 µH (then 18 nH).
  • The VR_PA pin has a capacitor to GND on 31 of 34 designs, most often 47 pF (then 47 nF).
VDD_INpin 1Connected to: 3.3V 89%
  • Decoupling capacitor on 86% · 100 nF (36), 1 µF (11), 10 nF (4)
GNDpin 2, 5, 8, 20, 25Connected to: GND 91%
XTApin 3Connected to: Signal 83% · not connected 17%
  • Crystal on 64% · 32 MHz (20)
XTBpin 4Connected to: Signal 75% · not connected 22%
  • Crystal on 64% · 32 MHz (20)
DIO3pin 6Connected to: Not connected 72% · a signal 25%
VREGpin 7Connected to: Signal 86%
  • Capacitor to GND on 86% · 470 nF (28), 100 nF (3)
  • Inductor on 78% · 15 µH (26), 47 nH (2), 18 nH (1)
DCC_SWpin 9Connected to: Signal 94%
  • Inductor on 89% · 15 µH (29), 18 nH (1), 47 nH (1)
VBATpin 10Connected to: 3.3V 91%
  • Decoupling capacitor on 83% · 100 nF (48), 1 µF (9), 10 µF (5)
VBAT_IOpin 11Connected to: 3.3V 86%
  • Decoupling capacitor on 86% · 100 nF (51), 1 µF (8), 10 µF (4)
DIO2pin 12Connected to: Signal 80%
  • Series resistor on 77% · 100 Ω (23), 49.9 Ω (1), 0 Ω (1)
RFI_Ppin 21Connected to: Signal 85%
  • Capacitor to GND on 32% · 1.8 pF (7), 100 nF (4), 3.3 pF (1)
RFI_Npin 22Connected to: Signal 88%
  • Inductor on 32% · 15 nH (7), 18 nH (1), 33 nH (1)
RFOpin 23Connected to: Signal 85%
  • Inductor on 76% · 47 nH (16), 0 H (2), 15 nH (1)
VR_PApin 24Connected to: Signal 94%
  • Capacitor to GND on 91% · 47 pF (25), 47 nF (15), 100 nF (8)
  • Inductor on 82% · 47 nH (23), 15 nH (1), 68 nH (1)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FLIPPER ETHERNET by ElectronicCats, Sensor Board by ElectronicCats, The-Mesh3310-Project by JLTelectronics and Gs by Horizon-Avionics.

The SX1262IMLTRT in open source designs

The gallery holds 49 open source boards using the SX1262IMLTRT from 37 GitHub repositories; a typical one measures about 59.7 × 57.7 mm and carries around 64 components.

69% use four copper layers or more, and 22% carry an open source license.

The most starred is Flipper subg by ElectronicCats.

Microcontrollers on boards using the SX1262IMLTRT

SX1262IMLTRT: common questions

Where can I find a SX1262IMLTRT reference design?

Each of the 49 boards on this page is a real design using the SX1262IMLTRT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SX1262IMLTRT VDD_IN pin?

The VDD_IN pin has a decoupling capacitor on 31 of 36 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 36 open source designs using the SX1262IMLTRT.

How is the SX1262IMLTRT VREG pin connected?

The VREG pin has a capacitor to GND on 31 of 36 designs, most often 470 nF (then 100 nF). Counted from the KiCad layouts of 36 open source designs using the SX1262IMLTRT.

How is the SX1262IMLTRT DCC_SW pin connected?

The DCC_SW pin has a inductor on 31 of 35 designs, most often 15 µH (then 18 nH). Counted from the KiCad layouts of 36 open source designs using the SX1262IMLTRT.

What parts are used alongside the SX1262IMLTRT?

The PE4259, RP2040, W25Q128JVS, AP2112K-3.3 and AMS1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the SX1262IMLTRT use?

Most are built on ESP32 (15), RP2040/RP2350 (10), STM32 (8) and Nordic nRF (4).

How big is a typical board using the SX1262IMLTRT?

The median is 59.7 × 57.7 mm, and 31% are two-layer designs.

What is the most popular open source board using the SX1262IMLTRT?

By GitHub stars, Flipper subg by ElectronicCats, with 130 stars.

Can I simulate one of these boards using the SX1262IMLTRT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part