Arduino NMR 5.2

SoukeyCircuits·ArduinoNMR·Past Boards/Arduino_NMR_06_01_26/Arduino_NMR_5.2.kicad_pcb

Arduino NMR 5.2 PCB layout, top view — open source AVR/Arduino board by SoukeyCircuits

About the Arduino NMR 5.2 PCB

Arduino NMR 5.2 is an open source AVR/Arduino PCB design by SoukeyCircuits, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 100 × 75 mm, with 76 components from 30 distinct parts.

Its main chip is the SN74LV1T04DBVR, from the AVR/Arduino family. Other key parts include the ADG904BRUZ-REEL7, PE4251MLI-Z, TLV74125PDBVR, BD80GC0MEFJ-ME2 and PHA-13HLN+. By type, the board carries 38 capacitors, 18 ICs, 14 resistors, 4 inductors and 1 crystal.

It belongs with the science & space, audio and test & measurement designs in this gallery.

From the project

Arduino based NMR spectrometer for use in low field applications.

IMPORTANT DISCLAIMER: The repository here is only the spectrometer for an NMR. You will need to purchase a sufficiently homogeneous magnet and a power amplifier to acquire any kind of measurement. A power amplifier can be purchased from aliexpress for under $100 but your quality and safety will vary significantly. If you are looking for a magnet, there are a few open source options that you can build yourself or commercially available ones.

Main components on the Arduino NMR 5.2

SN74LV1T04DBVRADG904BRUZ-REEL7PE4251MLI-ZTLV74125PDBVRBD80GC0MEFJ-ME2PHA-13HLN+SN74LV4052ADRSI5351A-B-GMLM4562MAX/NOPB

Arduino NMR 5.2 bill of materials (BOM)

76 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
SN74LV1T04DBVR
IC1, IC2, IC12
1
ADG904BRUZ-REEL7
IC3
5
PE4251MLI-Z
IC4, IC8, IC9, IC10, IC11
1
TLV74125PDBVR
IC5
1
BD80GC0MEFJ-ME2
BD50GC0VEFJ-ME2
IC6
1
BD80GC0MEFJ-ME2
BD80GC0VEFJ-ME2
IC7
2
PHA-13HLN+
IC13, IC14
1
BD80GC0MEFJ-ME2
BD33GA5WEFJ-E2
IC25
1
SN74LV4052ADR
U1
1
SI5351A-B-GM
Si5351A-B-GM
U2
1
LM4562MAX/NOPB
U4
1
ABM8G-25.000MHZ-B4Y-T
Y1
1
PE43711B-Z
AT2
2
LQW18AS5N1J0ZD
0603CS-5N1XJLW
L1, L3
2
LQH32DZ150K53L
L2, L15
3
100 nF
C1, C3, C14
6
1 nF
C2, C4, C5, C6, C15, C16
9
100 pF
C8, C9, C27, C28, C29, C32, C33, C39 +1
6
10 nF
C11, C12, C21, C22, C23, C26
2
1.5 pF
C20, C46
Show 10 more
QtyPartRefs
4
2.2 uF
C30, C45, C60, C66
2
100 nF
C31, C61
2
1 nF
C40, C64
2
10 uF
C41, C65
1
1 pF
C43
1
100 uF
C47
6
100Ω
R1, R6, R7, R13, R14, R15
4
10kΩ
R3, R4, R9, R10
2
1kΩ
R5, R8
2
1.5 k
R16, R17

Arduino NMR 5.2 design files

The KiCad project lives in the SoukeyCircuits/ArduinoNMR repository on GitHub; these links point at the commit this page was built from.

Arduino NMR 5.2: common questions

What microcontroller does the Arduino NMR 5.2 use?

The Arduino NMR 5.2 is built around the SN74LV1T04DBVR, from the AVR/Arduino family.

How big is the Arduino NMR 5.2 PCB?

The Arduino NMR 5.2 measures 100 × 75 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Arduino NMR 5.2?

76 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Arduino NMR 5.2 design files?

From the SoukeyCircuits/ArduinoNMR repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Arduino NMR 5.2 design in my own project?

Yes, under the terms of its GPL-3.0 license, which SoukeyCircuits chose for the repository.

Can I test firmware for the Arduino NMR 5.2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in ArduinoNMR

Similar boards