Barrel Power
SoukeyCircuits·ArduinoNMR·Arduino_NMR_09_23_26/Power_Barrel/KiCad_Files/Barrel_Power.kicad_pcb
About the Barrel Power PCB
Barrel Power is an open source PCB design by SoukeyCircuits, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 30 × 79 mm, with 8 components from 5 distinct parts.
Other key parts include the BD80GC0MEFJ-ME2. By type, the board carries 4 capacitors, 2 ICs and 2 connectors.
It belongs with the science & space designs in this gallery.
From the project
Arduino based NMR spectrometer for use in low field applications.
Barrel-jack version of the Power-USBC board. The PD negotiation and interlock are gone. It takes a DC input on J1 (PJ-058B), makes the +8 V (BD80GC0VEFJ-ME2) and +3.3 V (BD33GA5WEFJ-E2) rails, and feeds the main board over the same J2 (1×12) and J4 (2×5 right-angle) connectors.
Not yet built or ordered. The input voltage range hasn't been confirmed against the regulators; check the BD80 dropout before choosing a supply. IC25 is out of stock at JLC, so hand solder it.
Main components on the Barrel Power
Barrel Power bill of materials (BOM)
8 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BD80GC0MEFJ-ME2 BD80GC0VEFJ-ME2 | SOIC127P600X100-9N | IC7 |
| 1 | BD80GC0MEFJ-ME2 BD33GA5WEFJ-E2 | SOIC127P600X100-9N | IC25 |
| 1 | CONN_01X12 Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Horizontal | J4 |
| 4 | 10 nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C25, C26, C28 |
Barrel Power design files
The KiCad project lives in the SoukeyCircuits/ArduinoNMR repository on GitHub; these links point at the commit this page was built from.
Barrel Power: common questions
How big is the Barrel Power PCB?
The Barrel Power measures 30 × 79 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Barrel Power?
8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Barrel Power design files?
From the SoukeyCircuits/ArduinoNMR repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Barrel Power design in my own project?
Yes, under the terms of its GPL-3.0 license, which SoukeyCircuits chose for the repository.
More boards in ArduinoNMR
Similar boards
PiFinder4
brickbots
98 × 75 mm150 parts4LGPL-3.0250PiFinder smt
brickbots
93.8 × 64.2 mm47 parts2LGPL-3.0250Batteryboard
pycubed
95.9 × 90.2 mm28 parts2LNo license97CubeSatKit StackBoard
imciner2
90.2 × 95.9 mm3 partsCC-BY-SA-4.065Fox-1-MPPT
FaradayRF
95 × 95 mm453 parts4LCustom license62Open spectrometer
tomkinsc
63.6 × 67.5 mm75 partsNo license30