PCB
souptik-samanta·Sensor-Node·PCB/PCB.kicad_pcb
About the PCB
PCB is an open source STM32 PCB design by souptik-samanta, published on GitHub. It is a 4-layer board measuring 96 × 60 mm, with 50 components from 26 distinct parts.
Its main chip is the STM32L052C8TX, from the STM32 family. Other key parts include the USBLC6-2P6, AP2112K-3.3, BQ25176J, SHT4X and LPS25HB. By type, the board carries 16 capacitors, 16 resistors, 7 ICs, 5 connectors, 2 diodes and 1 battery holder.
It belongs with the sensors, power & battery and rf & radio designs in this gallery.
From the project
A compact environmental monitoring node built around the STM32L052 microcontroller. The board measures temperature, humidity, while providing onboard storage and support for external SX1262 LoRa modules.
A compact environmental monitoring node built around the STM32L052 microcontroller. The board measures temperature, humidity, while providing onboard storage and support for external SX1262 LoRa modules.
I wanted to design a low-power sensor platform that could be deployed outdoors for long periods while collecting environmental data. Instead of using multiple development boards, I designed a custom PCB that integrates sensing, power management, storage, and expansion capabilities into a single board.

Main components on the PCB
PCB bill of materials (BOM)
50 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L052C8TX STM32L052C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | BQ25176J | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U5 |
| 1 | SHT4X SHT4x | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U6 |
| 1 | LPS25HB | ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y | U7 |
| 1 | W25Q32JVSS | SOIC-8_5.3x5.3mm_P1.27mm | U8 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 2 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J3, J4 |
| 1 | Power select | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Battery_Cell | BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | Thermistor_NTC | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | TH1 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | 3.3UH 3.3uH | L_0603_1608Metric | L1 |
| 4 | 1UF 1uF | C_0603_1608Metric | C1, C2, C12, C13 |
| 8 | 100NF 100nF | C_0603_1608Metric | C3, C4, C7, C9, C11, C14, C15, C16 |
| 4 | 4.7UF 4.7uF | C_0603_1608Metric | C5, C6, C8, C10 |
| 9 | 10K 10k | R_0603_1608Metric | R1, R2, R5, R6, R11, R12, R13, R14 +1 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1K 5.1k | R_0603_1608Metric | R3, R4 |
| 1 | 600 | R_0603_1608Metric | R7 |
| 1 | 35.7K 35.7k | R_0603_1608Metric | R8 |
| 1 | 33K 33k | R_0603_1608Metric | R9 |
| 1 | 100K 100k | R_0603_1608Metric | R10 |
| 1 | LDR07 | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R15 |
PCB design files
The KiCad project lives in the souptik-samanta/Sensor-Node repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/PCB.kicad_pcb
- SchematicPCB/PCB.kicad_sch
- BOMPCB/production/bom.csv
PCB: common questions
What microcontroller does the PCB use?
The PCB is built around the STM32L052C8TX, from the STM32 family.
How big is the PCB?
The PCB measures 96 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PCB?
50 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCB design files?
From the souptik-samanta/Sensor-Node repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PCB design in my own project?
The repository has no license, so all rights stay with souptik-samanta. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k