13 open source boards using the LPS25HB
Real designs built with the LPS25HB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Signpost
lab11
68.1 × 66 mm61 parts4LApache-2.097ESP8266
ULP-Weather-Logger
hamityanik
37 × 66 mm49 parts2LMIT92STM32
Proteus
mck1117
135 × 82.5 mm348 parts4LNo license50STM32
Polygonus
FOME-Tech
103 × 82.4 mm299 parts4LNo license21Hellen121vag
rusefi
164 × 118 mm121 parts4LNo license7Hellen88bmw
rusefi
160 × 118 mm298 parts4LNo license2Hellen154hyundai
rusefi
164 × 156 mm201 parts4LNo license1Hellen miata-NA6
rusefi
154 × 159 mm196 parts2LNo license1Hellen miata-NA8
rusefi
154 × 159 mm186 parts2LNo license1Hellen miata-NB1
rusefi
154 × 159 mm185 parts2LNo license1STM32
Fome mc
halbritt
162 × 115 mm462 parts4LNo license0STM32
UHoubolt PCB GNSS
SpaceTeam
84.9 × 76 mm85 parts4LCERN-OHL-W-2.00STM32
PCB
souptik-samanta
96 × 60 mm50 parts4LNo license0
How designs wire the LPS25HB
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the LPS25HB connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF.
- The VDD pin has a decoupling capacitor on 12 of 12 designs, most often 100 nF.
- The SA0/MISO pin is tied to GND on 11 of 13 designs (a signal on 2).
- The CS pin is tied to 3.3V on 10 of 13 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDIOpin 1 | Connected to: 3.3V 92% |
|
| SCL/SCLKpin 2 | Connected to: The microcontroller 46%, Module-mcu144-0.6 23%, a connector 23% |
|
| GNDpin 3, 8, 9 | Connected to: GND 95% | — |
| SDA/MOSIpin 4 | Connected to: The microcontroller 46%, Module-mcu144-0.6 23%, a connector 23% |
|
| SA0/MISOpin 5 | Connected to: GND 85% · a signal 15% | — |
| CSpin 6 | Connected to: 3.3V 77% · a signal 23% | — |
| INT_DRDYpin 7 | Connected to: Not connected 69% · a signal 23% | — |
| VDDpin 10 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Signpost by lab11, ULP-Weather-Logger by hamityanik, Proteus by mck1117 and Polygonus by FOME-Tech.
The LPS25HB in open source designs
The gallery holds 13 open source boards using the LPS25HB from 13 GitHub repositories; a typical one measures about 154 × 115 mm and carries around 186 components.
69% use four copper layers or more, and 23% carry an open source license.
The most starred is Signpost by lab11.
Parts used alongside the LPS25HB
What boards using the LPS25HB are built for
LPS25HB: common questions
Where can I find a LPS25HB reference design?
Each of the 13 boards on this page is a real design using the LPS25HB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LPS25HB VDDIO pin?
The VDDIO pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the LPS25HB.
What decoupling capacitors do designs use on the LPS25HB VDD pin?
The VDD pin has a decoupling capacitor on 12 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the LPS25HB.
How is the LPS25HB SA0/MISO pin connected?
The SA0/MISO pin is tied to GND on 11 of 13 designs (a signal on 2). Counted from the KiCad layouts of 13 open source designs using the LPS25HB.
What parts are used alongside the LPS25HB?
The MCP6002-XSN, L6205PD, LIS2DW12TR, MPX4_MAP and 74HC2G17GW appear in the most repositories here.
Which microcontrollers do boards using the LPS25HB use?
Most are built on STM32 (5) and ESP8266 (1).
How big is a typical board using the LPS25HB?
The median is 154 × 115 mm, and 31% are two-layer designs.
What is the most popular open source board using the LPS25HB?
By GitHub stars, Signpost by lab11, with 97 stars.
Can I simulate one of these boards using the LPS25HB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.