Mini-Key

soykey·Mini-Key·board/Mini-Key.kicad_pcb

Mini-Key PCB layout, top view — open source RP2040/RP2350 board by soykey

About the Mini-Key PCB

Mini-Key is an open source RP2040/RP2350 PCB design by soykey, published on GitHub. It is a 2-layer board measuring 95 × 55 mm, with 13 components from 3 distinct parts.

Its main chip is the MOUDLE-SEEEDUINO-XIAO, from the RP2040/RP2350 family. By type, the board carries 6 switches, 6 diodes and 1 IC.

From the project

このプロジェクトは,自作キーボードの回路図とファームウェアとそのファームウェアで使用されるライブラリを格納しています.キーボードは3x2の6キーキーボードでマイコンはSeeed Studio XIAO RP2040を使用しています.

このプロジェクトは,自作キーボードの回路図とファームウェアとそのファームウェアで使用されるライブラリを格納しています.キーボードは3x2の6キーキーボードでマイコンはSeeed Studio XIAO RP2040を使用しています.

ファームウェアはCircuitPythonで書きました。以下のファイルがあります.

- code.py: メインのプログラムです.キー入力を検出し,対応するキーコードをUSB HIDデバイスとして送信します. - lib/: ファームウェアで使用されるライブラリが入っているディレクトリです.以下のライブラリが必要です. - adafruithid`: USB HIDデバイスとして動作するためのライブラリです.

キースイッチはお好みのCherry MX互換のものを使用してください.ダイオードの指定は特にありません.XIAO RP2040と1x7ピンヘッダとダイオード,キースイッチをはんだ付けしキーキャップを取り付ければ完成です.

Main components on the Mini-Key

Mini-Key bill of materials (BOM)

13 components, 3 distinct parts.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO
U1
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
6
D
D1, D2, D3, D4, D5, D6

Mini-Key design files

The KiCad project lives in the soykey/Mini-Key repository on GitHub; these links point at the commit this page was built from.

Mini-Key: common questions

What microcontroller does the Mini-Key use?

The Mini-Key is built around the MOUDLE-SEEEDUINO-XIAO, from the RP2040/RP2350 family.

How big is the Mini-Key PCB?

The Mini-Key measures 95 × 55 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mini-Key?

13 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mini-Key design files?

From the soykey/Mini-Key repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mini-Key design in my own project?

The repository has no license, so all rights stay with soykey. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mini-Key without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards