Yo

spacedivee·Satellite-Rotor-Control-·PCB/KiCad Files/yo/yo.kicad_pcb

Yo PCB layout, top view — open source board by spacedivee

About the Yo PCB

Yo is an open source PCB design by spacedivee, published on GitHub. It is a 2-layer board measuring 79.5 × 55 mm, with 13 components from 7 distinct parts.

Other key parts include the MOUDLE-SEEEDUINO-XIAO and ER_OLEDM0.91_1x-I2C. By type, the board carries 5 diodes, 2 ICs, 1 switch and 1 resistor.

It belongs with the rf & radio, keyboards and displays & leds designs in this gallery.

From the project

Grouping of all the files needed to make the controller.

KiCad — PCB design Onshape — enclosure design Arduino/C++ — programming JLCPCB — PCB manufacturing

Yo, from the project README
From the project README

Main components on the Yo

Yo bill of materials (BOM)

13 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO
U1
1
ER_OLEDM0.91_1x-I2C
U2
4
SW_Push
Azimuth+1, Azimuth-1, Elevation+1, Elevation-1
1
RotaryEncoder_Switch
SW1
4
1N4148
D1, D2, D3, D4
1
LED
D5
1
R
R1

Yo design files

The KiCad project lives in the spacedivee/Satellite-Rotor-Control- repository on GitHub; these links point at the commit this page was built from.

Yo: common questions

How big is the Yo PCB?

The Yo measures 79.5 × 55 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Yo?

13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Yo design files?

From the spacedivee/Satellite-Rotor-Control- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Yo design in my own project?

The repository has no license, so all rights stay with spacedivee. Use it as a reference, and ask the author before reusing the design.

More boards in Satellite-Rotor-Control-

Similar boards