134 open source boards using the ER_OLEDM0.91_1x-I2C
Real designs built with the ER_OLEDM0.91_1x-I2C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Entropy32-Plus
captainchapster
53 × 63 mm34 parts2LMIT37ESP32
STARLITE PRODUCTION
AndrewJ-25
154.2 × 250 mm62 parts2LNo license3Corepad
albertphu07
45.5 × 70 mm5 parts2LNo license3Nordic nRF
Apex
HashirX-ux
516.6 × 112.1 mm478 parts4LMIT2RP2040/RP2350
Keeb colon three
BananerCatter
369.3 × 148.8 mm166 parts2LNo license2Hackpad
husnainxali
71.1 × 94.5 mm32 parts2LMIT2Nordic nRF
Hackpadplusplus
0x62b
88.2 × 64.8 mm21 parts2LNo license2RP2040/RP2350
F24-keeb
Fork0n
409.7 × 150.7 mm362 parts2LCC-BY-4.01RP2040/RP2350
Keeb
qubixal
345 × 120 mm203 parts2LNo license1RP2040/RP2350
MochaDeck
FabioCanavarro
348.5 × 142.5 mm153 parts2LNo license1Raspberry Pi
65-percent keyboard
jeffmc6767
316 × 133.1 mm152 parts2LNo license1RP2040/RP2350
VNTR-65
FanieVenter
370 × 120 mm126 parts2LNo license1STM32
Flyback-Driver
Operationorange01
128 × 72.5 mm115 parts4LNo license1VAMP
syntonos
217.9 × 60 mm88 parts4LGPL-3.01Custom meshtastic node
kyrg4z
100 × 50 mm50 parts2LNo license1RP2040/RP2350
Media controller
bgb-0
60 × 70 mm42 parts2LGPL-2.01RP2040/RP2350
ValkDeck
SubhamSaiSamal
100 × 95.5 mm41 parts2LNo license1IK DEXK
kurkuregamerz
95 × 95 mm34 parts2LNo license1RP2040/RP2350
TejuPad
yadavtejas1947-eng
90.5 × 90 mm31 parts2LMIT1Lantern o nine
DhyaanKanoja11
96 × 99.5 mm25 parts2LNo license1Starfall
jeremyrapalo6-collab
84.9 × 96.9 mm21 parts2LNo license1Hackpad
ohhjazzv
93 × 113.5 mm20 parts2LNo license1Esp32-jammer
sohamboyythrdh6
60 × 110 mm17 parts4LNo license1MarcinhoPad
Developer-Vini
82 × 63 mm16 parts2LMIT1ESP32
Music kit
YogPanjarale
134 × 75 mm15 parts2LMIT1ESP32
Pendant usbc tester
thesleepyniko
79.5 × 61.5 mm15 parts2LNo license1Board
spacedivee
79.5 × 55 mm13 parts2LNo license1ESP32
Spectrum analyzer
JadenS180
74.9 × 100.3 mm11 parts2LMIT1RP2040/RP2350
DROPDECK
avadsariya0-coder
117.5 × 68.8 mm10 parts2LMIT1Pacpad
lxsh-S
68 × 65 mm8 parts2LNo license1ESP32
Wifi-Death-V1
izaanhussain
66 × 50.3 mm6 parts2LNo license1- schematic only · 7 partsRP2040/RP2350
Steganon-1
VAIBHAV3129
7 partsMIT1 RP2040/RP2350
Keyboard
ShadowFox88
466.6 × 138.7 mm427 parts2LNo license0RP2040/RP2350
Custom keyboard
HACKERHSB1453
178.2 × 127.1 mm267 parts2LNo license0RP2040/RP2350
Mechanical-Keyboard
Bihyungbetter
360 × 155 mm249 parts2LNo license0STM32
Tachi-Ninja
CreatorPoints
308.5 × 129 mm201 parts2LMIT0
How designs wire the ER_OLEDM0.91_1x-I2C
Read from the KiCad layouts of 125 open source designs, one per repository: what each pin of the ER_OLEDM0.91_1x-I2C connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 84% · a signal 15% | — |
| VCC_2pin 2 | Connected to: 3.3V 66% · a signal 34% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Entropy32-Plus by captainchapster, Corepad by albertphu07, Digisax by AndrewJ-25 and Hackpadplusplus by 0x62b.
The ER_OLEDM0.91_1x-I2C in open source designs
The gallery holds 134 open source boards using the ER_OLEDM0.91_1x-I2C from 130 GitHub repositories; a typical one measures about 88.4 × 72.5 mm and carries around 22 components.
95% are two-layer designs, the rest use four layers or more, and 21% carry an open source license.
The most starred is Entropy32-Plus by captainchapster.
Parts used alongside the ER_OLEDM0.91_1x-I2C
Microcontrollers on boards using the ER_OLEDM0.91_1x-I2C
What boards using the ER_OLEDM0.91_1x-I2C are built for
ER_OLEDM0.91_1x-I2C: common questions
Where can I find a ER_OLEDM0.91_1x-I2C reference design?
Each of the 134 boards on this page is a real design using the ER_OLEDM0.91_1x-I2C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ER_OLEDM0.91_1x-I2C?
The MOUDLE-SEEEDUINO-XIAO, RaspberryPi_Pico, AMS1117-3.3, USBLC6-2SC6 and ESP32-S3-WROOM-1 appear in the most repositories here.
Which microcontrollers do boards using the ER_OLEDM0.91_1x-I2C use?
Most are built on RP2040/RP2350 (29), ESP32 (24), AVR/Arduino (7) and Nordic nRF (3).
How big is a typical board using the ER_OLEDM0.91_1x-I2C?
The median is 88.4 × 72.5 mm, and 95% are two-layer designs.
What is the most popular open source board using the ER_OLEDM0.91_1x-I2C?
By GitHub stars, Entropy32-Plus by captainchapster, with 37 stars.
Can I simulate one of these boards using the ER_OLEDM0.91_1x-I2C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.