250W-buck converter
Spaceflakes·250W-buck-converter·250W Bat/250W Bat.kicad_pcb
About the 250W-buck converter PCB
250W-buck converter is an open source PCB design by Spaceflakes, published on GitHub under the MIT license. It is a 6-layer board measuring 50 × 50 mm, with 31 components from 26 distinct parts.
Other key parts include the PLM5149QRGYRQ1. By type, the board carries 14 capacitors, 8 resistors, 3 diodes, 2 transistors, 2 connectors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
Converts from upto 60V to ~25V at a continuous rating of 250W and a peak of 300W or more. Based on the LM5146 IC by TI.
The PUDGALA 300 is an open-source, high-power-density synchronous buck converter developed with HEX Aerospace. It steps down wide-range DC voltages (nominal 36V–54V battery buses, 7S–14S LiPo / Li-ion packs) down to a regulated 24.88V (25V / 24V compatible) rail delivering 10A continuous (250W nominal), and has been bench-tested up to 12.5A continuous (~312W) with peak efficiency exceeding 96%.

Main components on the 250W-buck converter
250W-buck converter bill of materials (BOM)
31 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PLM5149QRGYRQ1 | VQFN24_RGY_TEX | U1 |
| 1 | CSD19534Q5A | TDSON-8-1 | Q1 |
| 1 | CSD19502Q5B | TDSON-8-1 | Q2 |
| 1 | Power In | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |
| 1 | Power Out | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J2 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | SMBJ60A | D_SMB | D2 |
| 1 | SMBJ28A | D_SMB | D3 |
| 1 | 2.2u, 20A | L_Chilisin_BMRF00101040 | L1 |
| 2 | 22u | C_2220_5750Metric | C1, C2 |
| 2 | 100n | C_0603_1608Metric | C3, C14 |
| 4 | 10u | C_1210_3225Metric | C4, C11, C12, C13 |
| 1 | 1u | C_0402_1005Metric | C5 |
| 1 | 680p | C_0402_1005Metric | C6 |
| 1 | 24p | C_0402_1005Metric | C7 |
| 1 | 2.2u | C_0805_2012Metric | C8 |
| 1 | 47u | CP_8x15mm_horiz-R | C9 |
| 1 | 220u | CP_10x16mm_horiz-R | C10 |
| 1 | 9k09 | R_0402_1005Metric | R1 |
| 1 | 40k2 | R_0402_1005Metric | R2 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 5m | R_2512_6332Metric | R3 |
| 1 | 301k | R_0402_1005Metric | R4 |
| 1 | 10k | R_0402_1005Metric | R5 |
| 1 | 5k9 | R_0402_1005Metric | R6 |
| 1 | 100k | R_0402_1005Metric | R7 |
| 1 | 11k5 | R_0805_2012Metric | R8 |
250W-buck converter design files
The KiCad project lives in the Spaceflakes/250W-buck-converter repository on GitHub; these links point at the commit this page was built from.
- Layout250W Bat/250W Bat.kicad_pcb
- Schematic250W Bat/250W Bat.kicad_sch
250W-buck converter: common questions
How big is the 250W-buck converter PCB?
The 250W-buck converter measures 50 × 50 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the 250W-buck converter?
31 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the 250W-buck converter design files?
From the Spaceflakes/250W-buck-converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 250W-buck converter design in my own project?
Yes, under the terms of its MIT license, which Spaceflakes chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k