STS1 EEE
SpaceTeam·STS1_EEE
About the STS1 EEE PCB
STS1 EEE is an open source PCB design by SpaceTeam, published on GitHub. It is a 4-layer board measuring 81.1 × 85 mm, with 29 components from 21 distinct parts.
Other key parts include the coordinate_system, MP28167GQ and 1049. By type, the board carries 12 capacitors, 4 diodes, 4 resistors, 3 ICs, 2 connectors and 1 switch.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
The STS1 EPS EDU Ersatzboard is intended to replace the EPS board with a simple 4×AA-type battery voltage source and provide an interface to the Raspberry Pi HAT. It is intended for use in workshops and demonstrations where having the full stack is not necessary.
Main components on the STS1 EEE
STS1 EEE bill of materials (BOM)
29 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | coordinate_system | Coordinates | U1 |
| 1 | MP28167GQ | MP28167_QFN16 | U3 |
| 1 | 1049 | 1049 | U4 |
| 2 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_02x25_Odd_Even | PinHeader_2x25_P2.00mm_Vertical | CSBI_1 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.00mm_Vertical | CSBI_2 |
| 1 | CS12ANW03 SW_SPST | CS12ANW03 | SW1 |
| 1 | UCLAMP0871P.TNT | SGP1610N2 | D1 |
| 1 | AQ1003-01LTG | D_SOD-523 | D2 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D4 |
| 1 | 4.7uH | L_12x12mm_H6mm | L1 |
| 2 | 100uF | CP_EIA-7343-43_Kemet-X | C1, C12 |
| 1 | 22uF | C_1206_3216Metric | C2 |
| 4 | 100nF | C_0603_1608Metric | C3, C7, C8, C9 |
| 2 | 1uF | C_0805_2012Metric | C4, C5 |
| 1 | 22nF | C_0603_1608Metric | C6 |
| 2 | 10uF | C_0805_2012Metric | C10, C11 |
| 1 | 100mR | R_0603_1608Metric | R1 |
| 1 | 21k5 | R_0603_1608Metric | R2 |
| 1 | 2k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3k3 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
STS1 EEE design files
The KiCad project lives in the SpaceTeam/STS1_EEE repository on GitHub; these links point at the commit this page was built from.
- LayoutSTS1_EEE.kicad_pcb
- SchematicSTS1_EEE.kicad_sch
STS1 EEE: common questions
How big is the STS1 EEE PCB?
The STS1 EEE measures 81.1 × 85 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STS1 EEE?
29 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the STS1 EEE design files?
From the SpaceTeam/STS1_EEE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STS1 EEE design in my own project?
The repository has no license, so all rights stay with SpaceTeam. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k