SparkFun Audio Player Breakout MY1690X-16S
sparkfun·SparkFun_Audio_Player_Breakout_MY1690X-16S·Hardware/SparkFun_Audio_Player_Breakout_MY1690X-16S.kicad_pcb
About the SparkFun Audio Player Breakout MY1690X-16S
SparkFun Audio Player Breakout MY1690X-16S is an open source PCB design by sparkfun, published on GitHub under the MIT license. It is a 4-layer board measuring 25.4 × 25.4 mm, with 36 components from 27 distinct parts.
Other key parts include the MY1690X-16S. By type, the board carries 9 capacitors, 7 resistors, 6 connectors, 5 diodes, 3 jumpers and 1 IC.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
A small breakout board for the serial-controlled MY1690X-16S MP3/WAV audio player module.
SparkFun Design Files =====================================
The .sch and .brd files hare are Eagle CAD schematic and PCB design files from SparkFun Electronics. A freeware version of Autodesk Eagle can be found here.
Main components on the SparkFun Audio Player Breakout MY1690X-16S
SparkFun Audio Player Breakout MY1690X-16S bill of materials (BOM)
36 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MY1690X-16S | SO-16 | U2 |
| 1 | BSS138 | SOT23-3 | Q1 |
| 1 | 3.5mm TRRS | Audio_Jack_3.5mm_TRRS_SMD_RA | J1 |
| 1 | Conn_01x03 | 1x03 | J2 |
| 1 | Conn_01x02 | 1x02 | J3 |
| 1 | USB_C_Receptacle | USB-C_16 | J4 |
| 1 | Conn_01x06 | 1x06 | J5 |
| 1 | microSD | microSD_External_Pin | J6 |
| 1 | BUSY | Jumper_2_NC_Trace | JP1 |
| 1 | PWR | Jumper_2_NC_Trace | JP2 |
| 1 | SLV | Jumper_2_NC_Trace | JP3 |
| 3 | Standoff | Standoff | ST1, ST2, ST3 |
| 1 | Green | LED_0603_1608Metric_Green | D1 |
| 2 | BAT60A | SOD-323 | D2, D3 |
| 1 | Red | LED_0603_1608Metric_Red | D4 |
| 1 | DT1042-04SO | SOT23-6 | D6 |
| 1 | 470Ohm | C_0603_1608Metric | L1 |
| 2 | 2.2uF | C_0603_1608Metric | C1, C7 |
| 2 | 10uF | C_0603_1608Metric | C2, C6 |
| 2 | 0.1uF | C_0603_1608Metric | C3, C9 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 47uF | C_0805_2012Metric | C4, C5 |
| 1 | 1.0uF | C_0603_1608Metric | C8 |
| 2 | 2.2k | R_0603_1608Metric | R1, R4 |
| 2 | 5.1k | R_0603_1608Metric | R2, R3 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 1 | 100k | R_0603_1608Metric | R6 |
| 1 | 4.7k | R_0603_1608Metric | R9 |
SparkFun Audio Player Breakout MY1690X-16S design files
The KiCad project lives in the sparkfun/SparkFun_Audio_Player_Breakout_MY1690X-16S repository on GitHub; these links point at the commit this page was built from.
SparkFun Audio Player Breakout MY1690X-16S: common questions
How big is the SparkFun Audio Player Breakout MY1690X-16S?
The SparkFun Audio Player Breakout MY1690X-16S measures 25.4 × 25.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SparkFun Audio Player Breakout MY1690X-16S?
36 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun Audio Player Breakout MY1690X-16S design files?
From the sparkfun/SparkFun_Audio_Player_Breakout_MY1690X-16S repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SparkFun Audio Player Breakout MY1690X-16S design in my own project?
Yes, under the terms of its MIT license, which sparkfun chose for the repository.
More boards in SparkFun_Audio_Player_Breakout_MY1690X-16S
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k