SparkFun Qwiic WAV Trigger Pro panelized
About the SparkFun Qwiic WAV Trigger Pro panelized PCB
SparkFun Qwiic WAV Trigger Pro panelized is an open source STM32 PCB design by sparkfun, published on GitHub. It is a 2-layer board measuring 148.1 × 134.1 mm, with 97 components from 48 distinct parts.
Its main chip is the STM32H750VBTx, from the STM32 family. Other key parts include the TPD3S014, AP2112K-3.3, LP5907MFX-3.3, PCM5100 and AP3012. By type, the board carries 28 capacitors, 27 resistors, 10 connectors, 8 ICs, 6 diodes and 5 jumpers.
It belongs with the audio designs in this gallery.
From the project
An STM based WAV/MIDI device with a full speed USB interface.
SparkFun Qwiic WAV Trigger Pro ========================================
SparkFun Qwiic WAV Trigger Pro (WIG-25860)
The Qwiic WAV Trigger Pro is the latest evolution of the line of high-fidelity polyphonic audio players. The WAV Trigger Pro improves on the previous versions with a more powerful processor, enhanced MIDI processing - including velocity switching and multi-timbral support - and MIDI USB Device and MIDI USB Host[1] support, all in a smaller 1.75" x 1.5" footprint!
Main components on the SparkFun Qwiic WAV Trigger Pro panelized
SparkFun Qwiic WAV Trigger Pro panelized bill of materials (BOM)
97 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPD3S014 | SOT23-6 | U1 |
| 1 | AP2112K-3.3 | SOT23-5 | U2 |
| 1 | STM32H750VBTx | LQFP-100_14x14mm_P0.5mm | U3 |
| 1 | LP5907MFX-3.3 | SOT23-5 | U4 |
| 1 | PCM5100 | TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | AP3012 | SOT23-5 | U6 |
| 1 | AT25SF041-SSHD-T | SO-8 | U7 |
| 1 | ~ | Ordering_Instructions | U8 |
| 1 | 24MHz | Crystal_SMD_2.0x1.6mm | Y1 |
| 2 | Conn_01x02 | 1x02 | J1, J10 |
| 1 | USB_C_Receptacle | USB-C_16 | J2 |
| 2 | Qwiic_RA | JST_SMD_1.0mm-4_RA | J3, J4 |
| 1 | microSD | microSD_External_Pin | J5 |
| 1 | Conn_01x08 | 1x08 | J6 |
| 1 | JTAG | 2x05_P1.27mm | J7 |
| 1 | Conn_01x03 | 1x03 | J8 |
| 1 | Conn_01x04 | 1x04 | J9 |
| 1 | DEV/HST2 | Jumper_3_NC-1_Trace | JP1 |
| 1 | DEV/HST1 | Jumper_3_NC-1_Trace | JP2 |
| 1 | LED | Jumper_2_NC_Trace | JP4 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | I2C | Jumper_3_NC-2_Trace | JP5 |
| 1 | ANLG | Jumper_2_NC_Trace | JP6 |
| 4 | Standoff | Standoff | ST1, ST2, ST3, ST4 |
| 1 | SMD_4.6x2.8mm_h2.5mm | Push_SMD_4.6x2.8mm_h2.5mm | SW1 |
| 5 | 0.75mm | TestPoint-0.75mm | TP1, TP2, TP3, TP4, TP5 |
| 3 | BAT60A | SOD-323 | D1, D2, D6 |
| 1 | Red | LED_0603_1608Metric_Red | D3 |
| 1 | Green | LED_0603_1608Metric_Green | D4 |
| 1 | PMEG4005EJ | SOD-323 | D5 |
| 1 | 10uH | C_0805_2012Metric | L1 |
| 1 | 30Ω | C_0603_1608Metric | L2 |
| 4 | 1.0uF | C_0402_1005Metric | C1, C2, C26, C27 |
| 13 | 0.1uF | C_0402_1005Metric | C3, C4, C6, C7, C9, C10, C14, C16 +5 |
| 2 | 4.7uF | C_0402_1005Metric | C5, C15 |
| 4 | 2.2uF | C_0402_1005Metric | C8, C13, C20, C21 |
| 2 | 20pF | C_0402_1005Metric | C11, C12 |
| 1 | 10uF | C_0402_1005Metric | C19 |
| 2 | 2200pF | C_0402_1005Metric | C23, C24 |
| 7 | 10k | R_0402_1005Metric | R1, R8, R9, R16, R17, R21, R22 |
| 2 | 56k | R_0402_1005Metric | R2, R4 |
| 2 | 5.1k | R_0402_1005Metric | R3, R5 |
| 1 | 4.7k | R_0402_1005Metric | R6 |
| 9 | 100k | R_0402_1005Metric | R7, R10, R12, R13, R14, R18, R20, R23 +1 |
| 2 | 2.2k | R_0402_1005Metric | R11, R15 |
| 1 | 1k | R_0402_1005Metric | R19 |
| 1 | 33k | R_0402_1005Metric | R24 |
| 1 | 560 | R_0402_1005Metric | R26 |
| 1 | 680 | R_0402_1005Metric | R27 |
SparkFun Qwiic WAV Trigger Pro panelized design files
The KiCad project lives in the sparkfun/SparkFun_Qwiic_WAV_Trigger_Pro repository on GitHub; these links point at the commit this page was built from.
SparkFun Qwiic WAV Trigger Pro panelized: common questions
What microcontroller does the SparkFun Qwiic WAV Trigger Pro panelized use?
The SparkFun Qwiic WAV Trigger Pro panelized is built around the STM32H750VBTx, from the STM32 family.
How big is the SparkFun Qwiic WAV Trigger Pro panelized PCB?
The SparkFun Qwiic WAV Trigger Pro panelized measures 148.1 × 134.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SparkFun Qwiic WAV Trigger Pro panelized?
97 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun Qwiic WAV Trigger Pro panelized design files?
From the sparkfun/SparkFun_Qwiic_WAV_Trigger_Pro repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SparkFun Qwiic WAV Trigger Pro panelized design in my own project?
The repository has no license, so all rights stay with sparkfun. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SparkFun Qwiic WAV Trigger Pro panelized without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in SparkFun_Qwiic_WAV_Trigger_Pro
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k