20 open source boards using the STM32H750VBTx
Real designs built with the STM32H750VBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Glider
Modos-Labs
90 × 80 mm356 parts4LCERN-OHL-S-2.02.7kSTM32
Stm32h750-dev board
Essenceia
51.3 × 73 mm48 parts2LNo license16STM32
Astra v2
TheScientist101
35 × 32.4 mm41 parts4LCC-BY-NC-4.010STM32
Flight-Computer
SunDevilRocketry
93.7 × 43.7 mm109 parts4LNo license4STM32
Valve-Controller
SunDevilRocketry
134.2 × 60.2 mm103 parts4LNo license2STM32
SparkFun Qwiic WAV Trigger Pro
sparkfun
44.5 × 38.1 mm97 parts2LNo license2STM32
Liquid-Engine-Controller
SunDevilRocketry
116.8 × 56.7 mm114 parts4LNo license1STM32
Glider
pdyxs
90 × 80 mm356 parts4LCERN-OHL-S-2.00STM32
KASM ACTUATOR PCB REV2
gabeak2
121 × 70.6 mm247 parts6LGPL-3.00STM32
Rapid-CoreX
Arockiyalipson
130 × 85 mm166 parts4LMIT0STM32
HUMA-Rocket-Flight-Computer
manyetox
51.9 × 113.8 mm150 parts6LNo license0STM32
SRAD Altimeter
waterloo-rocketry
71.4 × 71.4 mm133 parts4LGPL-3.015ESP32
Controller
TheScientist101
89.1 × 49.9 mm28 parts2LCC-BY-NC-4.010STM32
SparkFun Qwiic WAV Trigger Pro panelized
sparkfun
148.1 × 134.1 mm97 parts2LNo license2STM32
PCB of Theseus
waterloo-rocketry
45.2 × 70.6 mm79 parts4LNo license0STM32
Syntheis and aeffects module
connormichalec
68 × 37.5 mm31 parts2LNo license0RP2040/RP2350
Dev board
iamdarshg
100 × 50 mm172 parts4LNo license1STM32
Pcb
shinemohans061
51.3 × 73 mm48 parts2LNo license0STM32
Camera
waterloo-rocketry
45.2 × 32.5 mm58 parts4LGPL-3.015STM32
CAN relay
waterloo-rocketry
50 × 43.5 mm43 parts4LGPL-3.015
How designs wire the STM32H750VBTx
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the STM32H750VBTx connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 47 µF).
- The VCAP pins have a capacitor to GND on 15 of 15 designs, most often 4.7 µF (then 2.2 µF).
- The VDDA pin has a decoupling capacitor on 14 of 16 designs, most often 100 nF (then 1 µF).
- The NRST pin has a capacitor to GND on 13 of 16 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 6 | Connected to: 3.3V 50% · not connected 25% · a signal 25% |
|
| VSSpin 10, 26, 49, 74, 99 | Connected to: GND 99% | — |
| VDDpin 11, 27, 50, 75, 100 | Connected to: 3.3V 86% |
|
| PH0pin 12 | Connected to: Signal 81% · not connected 19% |
|
| PH1pin 13 | Connected to: Signal 75% · not connected 19% |
|
| NRSTpin 14 | Connected to: A connector 56% |
|
| VSSApin 19 | Connected to: GND 94% | — |
| VREF+pin 20 | Connected to: 3.3V 56% · a signal 25% |
|
| VDDApin 21 | Connected to: 3.3V 81% |
|
| PA2pin 24 | Connected to: A connector 31% |
|
| PA3pin 25 | Connected to: A connector 31% |
|
| VCAPpin 48, 73 | Connected to: Signal 100% |
|
| PC10pin 78 | Connected to: A connector 73% |
|
| PC11pin 79 | Connected to: A connector 73% |
|
| PB6pin 92 | Connected to: A connector 27% · not connected 27% |
|
| PB7pin 93 | Connected to: A connector 27% · not connected 33% |
|
| BOOT0pin 94 | Connected to: A connector 47% · GND 20% |
|
74 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Glider by Modos-Labs, Stm32h750-dev board by Essenceia, SRAD Altimeter by waterloo-rocketry and Astra v2 by TheScientist101.
The STM32H750VBTx in open source designs
The gallery holds 20 open source boards using the STM32H750VBTx from 16 GitHub repositories; a typical one measures about 80.2 × 65.4 mm and carries around 100 components.
70% use four copper layers or more, and 35% carry an open source license.
The most starred is Glider by Modos-Labs.
Parts used alongside the STM32H750VBTx
Microcontrollers on boards using the STM32H750VBTx
What boards using the STM32H750VBTx are built for
STM32H750VBTx: common questions
Where can I find a STM32H750VBTx reference design?
Each of the 20 boards on this page is a real design using the STM32H750VBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32H750VBTx VDD pin?
The VDD pins have a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 16 open source designs using the STM32H750VBTx.
How is the STM32H750VBTx VCAP pin connected?
The VCAP pins have a capacitor to GND on 15 of 15 designs, most often 4.7 µF (then 2.2 µF). Counted from the KiCad layouts of 16 open source designs using the STM32H750VBTx.
What decoupling capacitors do designs use on the STM32H750VBTx VDDA pin?
The VDDA pin has a decoupling capacitor on 14 of 16 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 16 open source designs using the STM32H750VBTx.
What parts are used alongside the STM32H750VBTx?
The USBLC6-2P6, CP2102-GMR, LMS8117AMP-3.3_NOPB, ADV7611 and CBTL02043A appear in the most repositories here.
Which microcontrollers do boards using the STM32H750VBTx use?
Most are built on STM32 (18), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the STM32H750VBTx?
The median is 80.2 × 65.4 mm, and 30% are two-layer designs.
What is the most popular open source board using the STM32H750VBTx?
By GitHub stars, Glider by Modos-Labs, with 2,676 stars.
Can I simulate one of these boards using the STM32H750VBTx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.