SparkFun Red Vision Camera Board HM01B0
sparkfun·SparkFun_Red_Vision_Camera_Board_HM01B0·Hardware/SparkFun_Red_Vision_Camera_Board_HM01B0.kicad_pcb
About the SparkFun Red Vision Camera Board HM01B0
SparkFun Red Vision Camera Board HM01B0 is an open source PCB design by sparkfun, published on GitHub. It is a 4-layer board measuring 22.9 × 35.6 mm, with 39 components from 20 distinct parts.
Other key parts include the HM01B0 and RT9080-2.8V. By type, the board carries 9 resistors, 6 jumpers, 6 capacitors, 4 transistors, 4 connectors and 4 test points.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
The SparkFun Red Vision Camera Board - HM01B0 is a breakout board for the HM01B0 camera module.
SparkFun Red Vision Camera Board - HM01B0 (Color) ================================================ [](https://www.sparkfun.com/sparkfun-red-vision-camera-board-hm01b0-color.html)
The SparkFun Red Vision Camera Board - HM01B0 is a breakout board for the HM01B0 320 x 320 color camera module from Himax©. The Camera Board breaks out all the pins from the HM01B0's ribbon cable to three sets of 0.1"-spaced plated through-hole (PTH) headers for users to easily access. We designed the Red Vision Camera Board - HM01B0 to work both as a standalone breakout board and also as a compliment to the…

Main components on the SparkFun Red Vision Camera Board HM01B0
SparkFun Red Vision Camera Board HM01B0 bill of materials (BOM)
39 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HM01B0 | HM01B0-ANA-00FT870 | U1 |
| 1 | RT9080-2.8V | SOT23-5 | U2 |
| 4 | RE1C002UNTCL | SC-89 SOT-490 | Q1, Q2, Q3, Q4 |
| 1 | 24MHz | Crystal_SMD_3.2x2.5mm | Y1 |
| 3 | Conn_01x09 | 1x09 | J1, J2, J3 |
| 1 | HM01B0 | FPC_2x12-1MP_P0.4mm | J4 |
| 1 | I2C | Jumper_3_NC-2_Trace | JP1 |
| 1 | XCLK_PAD | Jumper_2_NO_NoSilk | JP2 |
| 1 | XCLK_OSC | Jumper_2_NC_Trace_NoSilk | JP3 |
| 1 | OSC_DIS | Jumper_2_NO | JP5 |
| 1 | XCLK_GND | Jumper_2_NO_NoSilk | JP6 |
| 1 | PWR | Jumper_2_NC_Trace | JP7 |
| 2 | Standoff | Standoff | ST1, ST2 |
| 4 | 1.25mm | TestPoint-1.25mm | TP1, TP2, TP3, TP4 |
| 1 | Red | LED_0603_1608Metric_Red | D1 |
| 2 | 2.2uF | C_0603_1608Metric | C1, C2 |
| 1 | 10nF | C_0603_1608Metric | C5 |
| 3 | 0.1uF | C_0603_1608Metric | C6, C7, C8 |
| 5 | 2.2k | R_0603_1608Metric | R1, R2, R3, R4, R7 |
| 4 | 100k | R_0603_1608Metric | R5, R6, R8, R9 |
SparkFun Red Vision Camera Board HM01B0 design files
The KiCad project lives in the sparkfun/SparkFun_Red_Vision_Camera_Board_HM01B0 repository on GitHub; these links point at the commit this page was built from.
SparkFun Red Vision Camera Board HM01B0: common questions
How big is the SparkFun Red Vision Camera Board HM01B0?
The SparkFun Red Vision Camera Board HM01B0 measures 22.9 × 35.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SparkFun Red Vision Camera Board HM01B0?
39 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun Red Vision Camera Board HM01B0 design files?
From the sparkfun/SparkFun_Red_Vision_Camera_Board_HM01B0 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SparkFun Red Vision Camera Board HM01B0 design in my own project?
The repository has no license, so all rights stay with sparkfun. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979