3 open source boards using the RT9080-2.8V

Real designs built with the RT9080-2.8V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The RT9080-2.8V in open source designs

The gallery holds 3 open source boards using the RT9080-2.8V from 3 GitHub repositories; a typical one measures about 22.9 × 35.6 mm and carries around 39 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is SparkFun Camera Board - HM01B0 by sparkfun.

Parts used alongside the RT9080-2.8V

What boards using the RT9080-2.8V are built for

RT9080-2.8V: common questions

Where can I find a RT9080-2.8V reference design?

Each of the 3 boards on this page is a real design using the RT9080-2.8V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the RT9080-2.8V?

The median is 22.9 × 35.6 mm, and 0% are two-layer designs.

What is the most popular open source board using the RT9080-2.8V?

By GitHub stars, SparkFun Camera Board - HM01B0 by sparkfun, with 2 stars.

Can I simulate one of these boards using the RT9080-2.8V before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part