Tempbox

spdidle·tempbox·temp/temp.kicad_pcb

Tempbox PCB layout, top view — open source RP2040/RP2350 board by spdidle

About the Tempbox PCB

Tempbox is an open source RP2040/RP2350 PCB design by spdidle, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 30 components from 26 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the MAX98357A. By type, the board carries 13 switches, 6 resistors, 3 capacitors, 2 connectors, 2 diodes and 1 IC.

Main components on the Tempbox

Tempbox bill of materials (BOM)

30 components, 26 distinct parts.

QtyPartRefs
1
MAX98357A
U2
1
RaspberryPi_Pico
A1
1
Barrel_Jack
J1
1
Micro_SD_Card
J2
1
Speaker
LS1
1
10k
RV1
1
A
SW1
1
B
SW2
1
C
SW3
1
D
SW4
1
E
SW5
1
F
SW6
1
1
SW7
1
2
SW8
1
3
SW9
1
4
SW10
1
5
SW11
1
6
SW12
1
SW_SPST
SW13
1
LED
D1
Show 6 more
QtyPartRefs
1
D_Schottky
D2
2
10uF
C1, C2
1
0.1uF
C3
1
1k
R1
1
100k
R2
4
10k
R5, R6, R7, R8

Tempbox design files

The KiCad project lives in the spdidle/tempbox repository on GitHub; these links point at the commit this page was built from.

Tempbox: common questions

What microcontroller does the Tempbox use?

The Tempbox is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Tempbox PCB?

The Tempbox measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tempbox?

30 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tempbox design files?

From the spdidle/tempbox repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tempbox design in my own project?

The repository has no license, so all rights stay with spdidle. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tempbox without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards