Test
specs32·flatlight·REV15/KICAD/PROJECTS/flatlight_rev15/gerber_rev15/test.kicad_pcb
About the Test PCB
Test is an open source AVR/Arduino PCB design by specs32, published on GitHub. It is a 2-layer board measuring 78 × 48 mm, with 42 components from 27 distinct parts.
Its main chip is the ATmega88-20AU, from the AVR/Arduino family. Other key parts include the DIO5158. By type, the board carries 13 resistors, 8 capacitors, 5 diodes, 4 test points, 3 connectors and 3 switches.
From the project
Flat flashlight code and schematics
The gerberrev15 folder contains updated PCBNEW designs for kicad that are not applied to the single PCB versions in the eside / ledside folders.
Main components on the Test
Test bill of materials (BOM)
42 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega88-20AU | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | DIO5158 | MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm | U2 |
| 1 | IRF7343PBF | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | IRLML6344TRPBF | SOT-23-3 | Q2 |
| 1 | USB_B_Micro | Conn_USBmicro-B_ebay-side_TH_GROUND | J1 |
| 1 | TEMP_SENSOR | PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | ISP_CONN | Conn_01x06_SMD_2mm | J3 |
| 1 | LIPO_W_NTC | CONN_AVX_RT_ANGLE_3pin_2.5mm_pitch | BAT1 |
| 1 | nano_sw | white_nano_smd_switch | SW1 |
| 2 | SW_DIP_x01 | white_nano_smd_switch | SW2, SW3 |
| 1 | COM | 2_pad_smd_bat_conn | TP1 |
| 2 | TestPoint | 1_pad_smd | TP2, TP4 |
| 1 | OSC | 2_pad_smd_bat_conn | TP3 |
| 1 | LED_RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LED_PINK | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LED_GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 2 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D4, D8 |
| 1 | 10µH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 3 | 10µF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6, C11 |
| 4 | 100nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5, C7, C12 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1µF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | 1.2kΩ | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 5 | 1kΩ | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R8, R9, R12 |
| 1 | 15kΩ | R_1210_3225Metric_Pad1.42x2.65mm_HandSolder | R4 |
| 4 | 10kΩ | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R7, R10, R11 |
| 1 | 100kΩ | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 1MΩ | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
Test design files
The KiCad project lives in the specs32/flatlight repository on GitHub; these links point at the commit this page was built from.
Test: common questions
What microcontroller does the Test use?
The Test is built around the ATmega88-20AU, from the AVR/Arduino family.
How big is the Test PCB?
The Test measures 78 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Test?
42 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Test design files?
From the specs32/flatlight repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Test design in my own project?
The repository has no license, so all rights stay with specs32. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Test without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in flatlight
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k