Modular eside rev8

specs32·flatlight·old_tree/KiCAD/modular_eside_rev8/modular_eside_rev8.kicad_pcb

Modular eside rev8 PCB layout, top view — open source AVR/Arduino board by specs32

About the Modular eside rev8 PCB

Modular eside rev8 is an open source AVR/Arduino PCB design by specs32, published on GitHub. It is a 2-layer board measuring 77.5 × 48 mm, with 45 components from 35 distinct parts.

Its main chip is the ATMEGA16-16AU, from the AVR/Arduino family. Other key parts include the TP4056. By type, the board carries 15 resistors, 9 diodes, 6 connectors, 6 capacitors, 3 switches and 2 ICs.

From the project

Flat flashlight code and schematics

Main components on the Modular eside rev8

TP4056ATMEGA16-16AU

Modular eside rev8 bill of materials (BOM)

45 components, 35 distinct parts.

QtyPartRefs
1
TP4056
U1
1
ATMEGA16-16AU
U2
1
IRF7319
Q1
1
IRLML6244
Q2
1
USB_Micro_Jack
J1
1
CONN_01X08
J2
1
CONN_PWM_2_FEMALE
J4
2
CONN_VCC_FEMALE
J6, J12
1
CONN_PWM_1_FEMALE
J10
1
LIPO_W_NTC
BAT1
1
SW_PWR
SW1
1
SW_MODE
SW2
1
SW_MODE2
SW3
1
RED
D1
1
GREEN
D2
1
CHRG_IND_BRTGREEN
D3
1
CHRG_IND_GREEN
D4
1
CHRG_IND_YELLOW
D5
1
CHRG_IND_ORANGE
D6
1
CHRG_IND_RED
D7
Show 15 more
QtyPartRefs
1
PWRLED_GRN
D8
1
TMPWARN_RED
D9
1
100µH
L1
2
10µF
C1, C2
1
1µF
C3
1
10µF TANT
C4
1
100nF
C6
1
100nF_decoupling
C7
1
1.2KΩ
R1
3
1KΩ
R2, R3, R10
2
100KΩ
R4, R6
4
10KΩ
R5, R7, R9, R22
3
237Ω
R8, R21, R23
1
15KΩ
R17
1
R_Pack_220Ω
RN1

Modular eside rev8 design files

The KiCad project lives in the specs32/flatlight repository on GitHub; these links point at the commit this page was built from.

Modular eside rev8: common questions

What microcontroller does the Modular eside rev8 use?

The Modular eside rev8 is built around the ATMEGA16-16AU, from the AVR/Arduino family.

How big is the Modular eside rev8 PCB?

The Modular eside rev8 measures 77.5 × 48 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Modular eside rev8?

45 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the Modular eside rev8 design files?

From the specs32/flatlight repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Modular eside rev8 design in my own project?

The repository has no license, so all rights stay with specs32. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Modular eside rev8 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in flatlight

Earlier revisions in the repo: modular_eside_rev4, modular_eside_rev3

Similar boards