Eside rev18

specs32·flatlight·REV18/KiCAD/Project/flatlight_rev18/eside_rev18A/eside_rev18.kicad_pcb

Eside rev18 PCB layout, top view — open source AVR/Arduino board by specs32

About the Eside rev18 PCB

Eside rev18 is an open source AVR/Arduino PCB design by specs32, published on GitHub. It is a 2-layer board measuring 100 × 60 mm, with 35 components from 22 distinct parts.

Its main chip is the ATmega328-MU, from the AVR/Arduino family. Other key parts include the MCP73831-2x3DFN8 and LSM6DS3. By type, the board carries 13 resistors, 7 capacitors, 3 ICs, 3 connectors, 3 switches and 3 diodes.

From the project

Flat flashlight code and schematics

Main components on the Eside rev18

MCP73831-2x3DFN8LSM6DS3ATmega328-MU

Eside rev18 bill of materials (BOM)

35 components, 22 distinct parts.

QtyPartRefs
1
MCP73831-2x3DFN8
U1
1
LSM6DS3
U2
1
ATmega328-MU
U3
1
DMC1016UPD
Q1
1
USB_B_Micro
J1
1
Conn_PROG
J2
1
Conn_01x04
J3
1
lipo_sams_BG930ABE
BT1
1
BTN_PWR
SW1
1
BTN_DIG1
SW2
1
BTN_DIG2
SW3
1
LED_ARGB
D1
2
APA102-2020
D2, D3
1
10µH
L1
1
10µF
C1
1
10µF
C2
1
1µF
C3
4
100nF
C4, C5, C6, C7
1
2kΩ
R1
4
10kΩ
R2, R3, R10, R11
Show 2 more
QtyPartRefs
7
1kΩ
R4, R6, R7, R8, R9, R12, R13
1
100kΩ
R5

Eside rev18 design files

The KiCad project lives in the specs32/flatlight repository on GitHub; these links point at the commit this page was built from.

Eside rev18: common questions

What microcontroller does the Eside rev18 use?

The Eside rev18 is built around the ATmega328-MU, from the AVR/Arduino family.

How big is the Eside rev18 PCB?

The Eside rev18 measures 100 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Eside rev18?

35 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Eside rev18 design files?

From the specs32/flatlight repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Eside rev18 design in my own project?

The repository has no license, so all rights stay with specs32. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Eside rev18 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in flatlight

Earlier revisions in the repo: eside_rev17, eside_rev15

Similar boards