Hackpad

SPGPaul·Hackpad·PCB/Board.kicad_pcb

Hackpad PCB layout, top view — open source RP2040/RP2350 board by SPGPaul

About the Hackpad PCB

Hackpad is an open source RP2040/RP2350 PCB design by SPGPaul, published on GitHub. It is a 2-layer board measuring 76.6 × 62.1 mm, with 10 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 5 switches, 4 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

Hackclub Hackpad Files

My first time using KiCAD but i hope i did a good job :)

Hackpad, from the project README
From the project README

Main components on the Hackpad

Hackpad bill of materials (BOM)

10 components, 4 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
4
SW_Push
SW1, SW2, SW3, SW4
1
RotaryEncoder
SW5
4
SK6812MINI
D1, D2, D3, D4

Hackpad design files

The KiCad project lives in the SPGPaul/Hackpad repository on GitHub; these links point at the commit this page was built from.

Hackpad: common questions

What microcontroller does the Hackpad use?

The Hackpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Hackpad PCB?

The Hackpad measures 76.6 × 62.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hackpad?

10 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hackpad design files?

From the SPGPaul/Hackpad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hackpad design in my own project?

The repository has no license, so all rights stay with SPGPaul. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hackpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards