Spec-IDE-Interface

spodula·Spec-IDE-Interface·Buffered/HDC.kicad_pcb

Spec-IDE-Interface PCB layout, top view — open source board by spodula

About the Spec-IDE-Interface PCB

Spec-IDE-Interface is an open source PCB design by spodula, published on GitHub. It is a 2-layer board measuring 84.3 × 56.6 mm, with 18 components from 12 distinct parts.

Other key parts include the 74LS245 and 74LS10. By type, the board carries 5 connectors, 4 resistors, 3 ICs, 3 capacitors, 2 diodes and 1 transistor.

It belongs with the test & measurement designs in this gallery.

From the project

Buffered and Unbuffered 8 bit IDE interfaces for the zx Spectrum.

This is a (Another) remake of the Pera Putnik/Gary Lancaster design for a simple 8-bit IDE interface for the zx Spectrum.

There are two versions of this, and unbuffered version which is basically the same as the PP/GL design except with additional HDD and Power LED pins.

The Buffered one buffers all the lines going to the Hard drive, which should make the interface more reliable for longer cable lengths.

Main components on the Spec-IDE-Interface

Spec-IDE-Interface bill of materials (BOM)

18 components, 12 distinct parts.

QtyPartRefs
2
74LS245
U1, U2
1
74LS10
U3
1
BC327
Q1
1
Spectrum 128/Grey +2 edge connector
J1
1
HDD_LED
J2
1
POWER
J3
1
PATA_40
J4
1
DOM_POWER_ENABLE
J5
2
LED
D1, D2
3
47nf
C1, C2, C3
1
100k
R1
3
330
R2, R3, R4

Spec-IDE-Interface design files

The KiCad project lives in the spodula/Spec-IDE-Interface repository on GitHub; these links point at the commit this page was built from.

Spec-IDE-Interface: common questions

How big is the Spec-IDE-Interface PCB?

The Spec-IDE-Interface measures 84.3 × 56.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Spec-IDE-Interface?

18 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Spec-IDE-Interface design files?

From the spodula/Spec-IDE-Interface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Spec-IDE-Interface design in my own project?

The repository has no license, so all rights stay with spodula. Use it as a reference, and ask the author before reusing the design.

Similar boards