41 open source boards using the 74LS10

Real designs built with the 74LS10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

41 boardsClear filters|Most starred

How designs wire the 74LS10

Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the 74LS10 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 15 of 30 designs, most often 100 nF (then 10 nF).
GNDpin 7Connected to: GND 97%
VCCpin 14Connected to: 5V 93%
  • Decoupling capacitor on 50% · 100 nF (9), 10 nF (5), 10 µF (2)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Space Odyssey by jotego, IBMReceiver by schlae, RC1802 UI by tebl and 6809v2 by jbevren.

The 74LS10 in open source designs

The gallery holds 41 open source boards using the 74LS10 from 36 GitHub repositories; a typical one measures about 115.8 × 100 mm and carries around 45 components.

85% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is Space Odyssey by jotego.

Microcontrollers on boards using the 74LS10

74LS10: common questions

Where can I find a 74LS10 reference design?

Each of the 41 boards on this page is a real design using the 74LS10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LS10 VCC pin?

The VCC pin has a decoupling capacitor on 15 of 30 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 30 open source designs using the 74LS10.

What parts are used alongside the 74LS10?

The 74LS04, 74LS74, 74LS00, 74LS08 and 74LS32 appear in the most repositories here.

Which microcontrollers do boards using the 74LS10 use?

Most are built on AVR/Arduino (3).

How big is a typical board using the 74LS10?

The median is 115.8 × 100 mm, and 85% are two-layer designs.

What is the most popular open source board using the 74LS10?

By GitHub stars, Space Odyssey by jotego, with 335 stars.

Can I simulate one of these boards using the 74LS10 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part