Stm32 hotswap chiffre

sporkus·le_chiffre_keyboard_stm32·kicad/pcb/stm32_hotswap_chiffre.kicad_pcb

Stm32 hotswap chiffre PCB layout, top view — open source STM32 board by sporkus

About the Stm32 hotswap chiffre PCB

Stm32 hotswap chiffre is an open source STM32 PCB design by sporkus, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 227.4 × 84.9 mm, with 107 components from 21 distinct parts.

Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the PRTR5V0U2X and XC6206PXXXMR-REGULATOR_LINEAR. By type, the board carries 46 diodes, 36 switches, 12 capacitors, 5 resistors, 3 ICs and 2 connectors.

It belongs with the keyboards designs in this gallery.

From the project

Le Chiffre keyboard pcb with stm32F072

Open sourced PCB originally design by tominabox1 updated to STM32 MCU.

To flash initially using dfu-util or qmk toolbox, plug in the board or push the reset button while DFU button is held down.

Stm32 hotswap chiffre, from the project README
From the project README

Main components on the Stm32 hotswap chiffre

Stm32 hotswap chiffre bill of materials (BOM)

107 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F072CBT6
U1
1
PRTR5V0U2X
U2
1
XC6206PXXXMR-REGULATOR_LINEAR
XC6206PxxxMR-Regulator_Linear
U3
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
1
CONN_01X03_FEMALE
Conn_01x03_Female
J101
1
ASMD1206-150
F1
1
JUMPER_2_OPEN
Jumper_2_Open
JP2
30
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +22
2
SW_Push
SW31, SW34
2
SW_Push
SW32, SW33
1
SW_Push
SW35
1
SKQGABE010
SW37
35
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +27
11
SK6812MINI
D101, D102, D103, D104, D105, D106, D107, D108 +3
1
C33600
60R@100MHz
MELED Industrial
L1
9
100NF
100nF
C1, C2, C3, C4, C5, C7, C8, C9 +1
1
10UF
10uF
C6
2
1UF
1uF
C11, C12
2
5.1K
5.1k
R1, R2
1
10K
10k
R3
Show 1 more
QtyPartRefs
2
4.7K
4.7k
R4, R5

Stm32 hotswap chiffre design files

The KiCad project lives in the sporkus/le_chiffre_keyboard_stm32 repository on GitHub; these links point at the commit this page was built from.

Stm32 hotswap chiffre: common questions

What microcontroller does the Stm32 hotswap chiffre use?

The Stm32 hotswap chiffre is built around the STM32F072CBT6, from the STM32 family.

How big is the Stm32 hotswap chiffre PCB?

The Stm32 hotswap chiffre measures 227.4 × 84.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32 hotswap chiffre?

107 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32 hotswap chiffre design files?

From the sporkus/le_chiffre_keyboard_stm32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stm32 hotswap chiffre design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which sporkus chose for the repository.

Can I test firmware for the Stm32 hotswap chiffre without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in le_chiffre_keyboard_stm32

Similar boards