Simple audio out
sporniket·simple-audio-out
About the Simple audio out PCB
Simple audio out is an open source PCB design by sporniket, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 49.5 × 72.4 mm, with 6 components from 6 distinct parts.
By type, the board carries 1 transistor, 1 connector, 1 speaker, 1 capacitor and 1 resistor.
It belongs with the audio designs in this gallery.
From the project
A simple audio output for a 4 Ohm speaker, with volume setting
1. What is Simple Audio Out, and when to use it ? 2. What should you know before using Simple Audio Out ? 3. How to use Simple Audio Out ? 4. Known issues 5. Miscellanous
Simple Audio Out is a simple audio output circuit for a 4 Ohm speaker, with volume setting
Simple Audio Out is published under the Creative Commons CC0 license. You can find a copy of the licence there : https://creativecommons.org/publicdomain/zero/1.0/legalcode
Simple audio out bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N3904 | TO-92_Inline_Wide | Q1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | 4 | PinHeader_1x02_P2.54mm_Horizontal | LS1 |
| 1 | 50K | Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 470uF | CP_Radial_D10.0mm_P3.80mm | C1 |
| 1 | 330 | Passive_THT_resistor_W2.54mm_L10.16mm | R1 |
Simple audio out design files
The KiCad project lives in the sporniket/simple-audio-out repository on GitHub; these links point at the commit this page was built from.
- Layoutsimple-audio-out.kicad_pcb
- Schematicsimple-audio-out.kicad_sch
Simple audio out: common questions
How big is the Simple audio out PCB?
The Simple audio out measures 49.5 × 72.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple audio out?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simple audio out design files?
From the sporniket/simple-audio-out repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Simple audio out design in my own project?
Yes, under the terms of its CC0-1.0 license, which sporniket chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687