Tesla Coil
About the Tesla Coil PCB
Tesla Coil is an open source PCB design by sPyOpenSource, published on GitHub under the MIT license. It is a 4-layer board measuring 200 × 97.5 mm, with 29 components from 22 distinct parts.
By type, the board carries 9 resistors, 7 connectors, 7 capacitors, 2 transistors, 2 diodes and 1 inductor.
It belongs with the robotics & motion, iot & wireless and power & battery designs in this gallery.
From the project
PCB boards designed with ESP32
Those PCB boards are designed with ESP32. E,g, mini drone, rc car, solar controller, etc.
It has 4 Motor Controller for Mini Drone with Wireless Connections.
2 Motor Controller for RC Car with Wireless Connections. An RC car is a type of remote-controlled vehicle that can be driven by using a radio transmitter or a smartphone app. RC cars can have different sizes, shapes, designs, and features, depending on their purpose and performance. Some RC cars are made for racing, while others are made for off-road, drifting, crawling, or bashing.
Tesla Coil bill of materials (BOM)
29 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Q_NPN_BCE | Dpak | Q1 |
| 1 | IRFIZ44N | SOT-223 | Q4 |
| 1 | SOLAR_INPUT | 1210 | J1 |
| 1 | SOLAR_OUTPUT | 1210 | J2 |
| 1 | Left | PIN16 | J3 |
| 1 | Right | PIN16 | J4 |
| 1 | 5V | 1210 | J5 |
| 1 | BATTERY_INPUT | 1210 | J6 |
| 1 | BATTERY_OUTPUT | 1210 | J7 |
| 1 | GPIO | PIN2 | RX1 |
| 1 | COMMS | 0603 | D1 |
| 1 | D_Schottky | DO-214AC | D2 |
| 1 | 33uH | 7447779139 | L3 |
| 4 | 0.1uF | 0603 | C1, C2, C3, C7 |
| 1 | 100uF | Cpol-6.3x7.7 | C4 |
| 1 | 1nF | 0603 | C5 |
| 1 | 220uF | Cpol-6.3x7.7 | C6 |
| 3 | 10k | 0603 | R1, R4, R9 |
| 3 | 560R | 0603 | R2, R6, R10 |
| 1 | 0.005R | 0603 | R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100R | 0603 | R5 |
| 1 | 220R | 0603 | R7 |
Tesla Coil design files
The KiCad project lives in the sPyOpenSource/ESP32-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutTeslaCoil/Tesla_Coil.kicad_pcb
- SchematicTeslaCoil/Tesla_Coil.kicad_sch
Tesla Coil: common questions
How big is the Tesla Coil PCB?
The Tesla Coil measures 200 × 97.5 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Tesla Coil?
29 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tesla Coil design files?
From the sPyOpenSource/ESP32-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tesla Coil design in my own project?
Yes, under the terms of its MIT license, which sPyOpenSource chose for the repository.
More boards in ESP32-PCB
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k