Board 10x10 alubox
About the Board 10x10 alubox
Board 10x10 alubox is an open source PCB design by Squantor, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 98 mm, with 64 components from 15 distinct parts.
By type, the board carries 24 connectors, 19 capacitors, 12 resistors, 4 switches and 4 LEDs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.
Board 10x10 alubox bill of materials (BOM)
64 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Proto | 4by4cm_module | J1, J2, J3, J4 |
| 1 | module_2x15_left_output | module_2x15_left | J5 |
| 3 | module_2x15_left_input | module_2x15_left | J6, J7, J8 |
| 1 | module_2x15_right_output | module_2x15_right | J9 |
| 3 | module_2x15_right_input | module_2x15_right | J10, J11, J12 |
| 12 | Conn_01x03 | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J13, J14, J15, J16, J17, J18, J19, J20 +4 |
| 1 | V:20230528 | Label_Generic | N2 |
| 4 | switch_DPDT | PS-22F02 | SW1, SW2, SW3, SW4 |
| 4 | LED_Dual_CC | LED_DUAL_TH245_90deg | LED1, LED2, LED3, LED4 |
| 4 | 10n | C_0805+0603 | C1, C2, C3, C4 |
| 12 | 1u | C_0805+0603 | C5, C6, C7, C8, C9, C10, C11, C12 +4 |
| 1 | 100u 35V | C-horizontal-035-080-200-elco-flipped | C17 |
| 2 | 100u 35V | C-horizontal-035-080-200-elco | C18, C19 |
| 4 | 1K | R_0805+0603 | R1, R2, R3, R4 |
| 8 | R | R_0603_hand | R5, R6, R7, R8, R9, R10, R11, R12 |
Board 10x10 alubox design files
The KiCad project lives in the Squantor/various_PCB repository on GitHub; these links point at the commit this page was built from.
Board 10x10 alubox: common questions
How big is the Board 10x10 alubox?
The Board 10x10 alubox measures 90 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Board 10x10 alubox?
64 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Board 10x10 alubox design files?
From the Squantor/various_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Board 10x10 alubox design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
More boards in various_PCB
NXP3phase stepper driver
56.6 × 57.6 mm29 parts2LMIT4
Module CH224K USB-C PD-sink tiled
83.8 × 55.6 mm25 parts2LMIT4
DIM VPS8505 PushPullConv tiled
73.3 × 55.1 mm17 parts2LMIT4
DIM SN6505 PushPullConv tiled
63.1 × 55.1 mm17 parts2LMIT4
DIM VPS8701 PushPullConv tiled
73.3 × 55.1 mm17 parts2LMIT4
Breakout sharp mem lcd tiled
59.5 × 49 mm17 parts2LMIT4
Breakout EEPROM SOIC tiled
55.4 × 45.2 mm11 parts2LMIT4
Breakout MCP73831 tiled
66.6 × 46.2 mm8 parts2LMIT4
Breakout FLASH SOIC tiled
65.5 × 45.2 mm7 parts2LMIT4
Breakout SOT363 panel
54.7 × 50.7 mm6 parts2LMIT4
Breakout SOT457 SOT23-6 panel
55.4 × 51.3 mm6 parts2LMIT4
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979