Breakout sharp mem lcd tiled
About the Breakout sharp mem lcd tiled
Breakout sharp mem lcd tiled is an open source PCB design by Squantor, published on GitHub under the MIT license. It is a 2-layer board measuring 59.5 × 49 mm, with 17 components from 12 distinct parts.
Other key parts include the REG710. By type, the board carries 6 capacitors, 3 resistors, 2 connectors, 2 jumpers, 2 inductors and 1 IC.
It belongs with the dev boards & breakouts and displays & leds designs in this gallery.
From the project
Various little boards are added here like level shifters, oscillator breakouts and other simple PCB's. Most of these boards are breadboard plugin friendly.
Main components on the Breakout sharp mem lcd tiled
Breakout sharp mem lcd tiled bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | REG710 | SOT23-6-HAND | U1 |
| 1 | Conn_01x06 | Header-0254-1X06-H010 | J1 |
| 1 | Conn_01x10 | TE_1-1734839-0_1x10-1MP_P0.5mm_Horizontal | J2 |
| 1 | EXTMODE | solder_jumper_0402_3way_12conn | JP1 |
| 1 | Vin/5V VDD | solder_jumper_0402_2way_noconn | JP2 |
| 1 | 20250323 | Label_Generic | N1 |
| 2 | 600 | L_0603 | FB1, FB2 |
| 2 | 1u | C_0603 | C1, C2 |
| 1 | 1n | C_0603 | C3 |
| 2 | 2.2u | C_0603 | C4, C5 |
| 1 | 0.22u | C_0603 | C6 |
| 3 | 10K | R_0603_hand | R1, R2, R3 |
Breakout sharp mem lcd tiled design files
The KiCad project lives in the Squantor/various_PCB repository on GitHub; these links point at the commit this page was built from.
Breakout sharp mem lcd tiled: common questions
How big is the Breakout sharp mem lcd tiled?
The Breakout sharp mem lcd tiled measures 59.5 × 49 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Breakout sharp mem lcd tiled?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Breakout sharp mem lcd tiled design files?
From the Squantor/various_PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Breakout sharp mem lcd tiled design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
More boards in various_PCB
Board 10x10 alubox
90 × 98 mm64 parts2LMIT4
NXP3phase stepper driver
56.6 × 57.6 mm29 parts2LMIT4
Module CH224K USB-C PD-sink tiled
83.8 × 55.6 mm25 parts2LMIT4
DIM VPS8505 PushPullConv tiled
73.3 × 55.1 mm17 parts2LMIT4
DIM VPS8701 PushPullConv tiled
73.3 × 55.1 mm17 parts2LMIT4
DIM SN6505 PushPullConv tiled
63.1 × 55.1 mm17 parts2LMIT4
Breakout EEPROM SOIC tiled
55.4 × 45.2 mm11 parts2LMIT4
Breakout MCP73831 tiled
66.6 × 46.2 mm8 parts2LMIT4
Breakout FLASH SOIC tiled
65.5 × 45.2 mm7 parts2LMIT4
Breakout SOT363 panel
54.7 × 50.7 mm6 parts2LMIT4
Breakout SOT457 SOT23-6 panel
55.4 × 51.3 mm6 parts2LMIT4
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k