TEST PNAL

SREERAJSVT·SiSeriesRadio·TEST PNAL/TEST PNAL.kicad_pcb

TEST PNAL PCB layout, top view — open source board by SREERAJSVT

About the TEST PNAL PCB

TEST PNAL is an open source PCB design by SREERAJSVT, published on GitHub. It is a 2-layer board measuring 71.1 × 62.2 mm, with 48 components from 25 distinct parts.

Other key parts include the SC0918, AP2114H-3.3TRG1 and LM7805_TO220. By type, the board carries 12 resistors, 11 capacitors, 8 connectors, 6 switches, 3 ICs and 3 inductors.

It belongs with the rf & radio, displays & leds and power & battery designs in this gallery.

From the project

This project details the design and development of a Si4732/Si4735 based radio receiver utilizing a Raspberry Pi Pico for control and a custom-designed PCB

Below is a clean, corrected, and professional rewrite of your README, with naming fixes, consistency improvements, and hyperlink validation/cleanup. I’ve kept it GitHub-ready, clear for open-source users, and suitable for OSHW platforms.

Open-Source Si4732 / Si4735 Radio Receiver with Raspberry Pi Pico Front End

This project documents the design and development of a modular Si4732 / Si4735–based radio receiver, controlled by a Raspberry Pi Pico and implemented on a custom, fully open-source PCB platform.

Main components on the TEST PNAL

TEST PNAL bill of materials (BOM)

48 components, 25 distinct parts.

QtyPartRefs
1
SC0918
IC1
1
AP2114H-3.3TRG1
U1
1
LM7805_TO220
U2
1
32.768KHz
Y1
1
FMI
J1
1
Conn_01x05_Pin
J2
2
I2C I2S
J3, J6
3
CON
J4, J5, J8
1
ANT 32 H
J7
1
RIGHT
SW1
1
UP
SW2
1
DOWN
SW3
1
LEFT
SW4
1
SELECT
SW5
1
RotaryEncoder_Switch_MP
SW6
2
SSD1306
B1, B2
2
1N5817
D1, D2
3
180-450uH
L1, L2, L3
4
104
C1, C3, C6, C7
2
100uF
C2, C4
Show 5 more
QtyPartRefs
4
22pF
C5, C8, C9, C11
1
470nF
C10
7
10K
R1, R2, R3, R4, R8, R9, R10
1
2.2K
R5
4
4.7k
R6, R7, R11, R12

TEST PNAL design files

The KiCad project lives in the SREERAJSVT/SiSeriesRadio repository on GitHub; these links point at the commit this page was built from.

TEST PNAL: common questions

How big is the TEST PNAL PCB?

The TEST PNAL measures 71.1 × 62.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TEST PNAL?

48 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the TEST PNAL design files?

From the SREERAJSVT/SiSeriesRadio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TEST PNAL design in my own project?

The repository has no license, so all rights stay with SREERAJSVT. Use it as a reference, and ask the author before reusing the design.

More boards in SiSeriesRadio

Similar boards