Satellite model
srjofficial·satellite-model·hardware/kicad/satellite.kicad_pcb
About the Satellite model PCB
Satellite model is an open source ESP32 PCB design by srjofficial, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 86 mm, with 29 components from 25 distinct parts.
Its main chip is the ESP32-CAM, from the ESP32 family. By type, the board carries 21 connectors, 4 capacitors and 4 resistors.
It belongs with the rf & radio, power & battery and robotics & motion designs in this gallery.
From the project
CubeSat-Style 1U Satellite Working Model: Dual-Axis Solar Tracking, ESP32-CAM Payload, LoRa Telemetry & Image Downlink, KiCad PCB & OpenSCAD CAD
Open satellite.kicadpro in KiCad 8 or newer**.
Mounting holes: M3 at 80 x 76 mm spacing (matches cad/satellite.scad). The top edge (y = 0) is the camera edge.
Not checked: I could not open these files in KiCad itself. Expect small load or DRC surprises. Fix them in KiCad rather than re-running the script if you have already edited the board.
Satellite model bill of materials (BOM)
29 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-CAM | ESP32-CAM_Socket_2x08_Row22.86mm | J1 |
| 1 | ESP32 DevKit 30p | ESP32_DevKit_30pin_Socket_Row22.86mm | J2 |
| 1 | SX1278 Ra-02 | SX1278_RA-02_2x08_P2.00mm_Row16mm | J3 |
| 1 | LoRa antenna | Header_1x02_P2.54mm_XAxis | J4 |
| 1 | Flash jumper (IO0-GND) | Header_1x02_P2.54mm_XAxis | J5 |
| 1 | Solar panel | Header_1x02_P2.54mm_XAxis | J6 |
| 1 | INA219 solar | Header_1x06_P2.54mm_XAxis | J7 |
| 1 | TP4056 module | Header_1x06_P2.54mm_XAxis | J8 |
| 1 | INA219 battery | Header_1x06_P2.54mm_XAxis | J9 |
| 1 | 18650 holder | Header_1x02_P2.54mm_XAxis | J10 |
| 1 | Power switch | Header_1x02_P2.54mm_XAxis | J11 |
| 1 | 5V boost | Header_1x04_P2.54mm_XAxis | J12 |
| 1 | 3.3V LDO | Header_1x03_P2.54mm_XAxis | J13 |
| 1 | BME280 | Header_1x04_P2.54mm_XAxis | J14 |
| 1 | MPU6050 | Header_1x04_P2.54mm_XAxis | J15 |
| 1 | Pan servo | Header_1x03_P2.54mm_XAxis | J16 |
| 1 | Tilt servo | Header_1x03_P2.54mm_XAxis | J17 |
| 1 | LDR TL | Header_1x02_P2.54mm_XAxis | J18 |
| 1 | LDR TR | Header_1x02_P2.54mm_XAxis | J19 |
| 1 | LDR BL | Header_1x02_P2.54mm_XAxis | J20 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LDR BR | Header_1x02_P2.54mm_XAxis | J21 |
| 2 | 470uF | CP_Radial_D8.0mm_P3.50mm | C1, C2 |
| 1 | 10uF | C_0805 | C3 |
| 1 | 100nF | C_0805 | C4 |
| 4 | 10k | R_0805 | R1, R2, R3, R4 |
Satellite model design files
The KiCad project lives in the srjofficial/satellite-model repository on GitHub; these links point at the commit this page was built from.
Satellite model: common questions
What microcontroller does the Satellite model use?
The Satellite model is built around the ESP32-CAM, from the ESP32 family.
How big is the Satellite model PCB?
The Satellite model measures 90 × 86 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Satellite model?
29 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Satellite model design files?
From the srjofficial/satellite-model repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Satellite model design in my own project?
Yes, under the terms of its MIT license, which srjofficial chose for the repository.
Can I test firmware for the Satellite model without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k