Keeb-K1

SSRWuhan·keeb-K1·pcb/keeb_k1_pcb.kicad_pcb

Keeb-K1 PCB layout, top view — open source RP2040/RP2350 board by SSRWuhan

About the Keeb-K1 PCB

Keeb-K1 is an open source RP2040/RP2350 PCB design by SSRWuhan, published on GitHub under the MIT license. It is a 2-layer board measuring 388.6 × 140.6 mm, with 187 components from 5 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 94 switches, 91 diodes, 1 module and 1 connector.

It belongs with the keyboards designs in this gallery.

From the project

This is my keyboard design for the KEEB program from Hack Club.

This is my very first keyboard! I have designed it so that you can have 6 configurable keys for macros or any other thing, along with joystick for scrolling or for using it as a mouse.

This was my first time making a PCB and writting firmware. Even though I already have experience with CAD, I did learn a few new things while making this.

NOTE: This project is still in active development as I still haven't made it in real life. Also, The firmware is complete, but support for vial is still in the works. Thus, vial.json won't work.

Keeb-K1, from the project README
From the project README

Main components on the Keeb-K1

Keeb-K1 bill of materials (BOM)

187 components, 5 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
Conn_01x04
J1
3
MX_stab
S1, S2, S3
91
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +83
91
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +83

Keeb-K1 design files

The KiCad project lives in the SSRWuhan/keeb-K1 repository on GitHub; these links point at the commit this page was built from.

Keeb-K1: common questions

What microcontroller does the Keeb-K1 use?

The Keeb-K1 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keeb-K1 PCB?

The Keeb-K1 measures 388.6 × 140.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keeb-K1?

187 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Keeb-K1 design files?

From the SSRWuhan/keeb-K1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Keeb-K1 design in my own project?

Yes, under the terms of its MIT license, which SSRWuhan chose for the repository.

Can I test firmware for the Keeb-K1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards